Alcatel Unleashed

Hi all,

We have a User with around 32 IBS DECT Stations (some 3 Channel, some 6 Channel) and an OXE Running R11.2.032a and around 130 DECT Phones (Mobile 300, 8242...)

Problem:
I make a Call from DECT to DECT. The caller Set rings 2 Times and Release the Call with "Not possible" Same when Calling Set is UA Or Z.

I only Knew this Problem when the DECT Set is out of Range.
But the Set is in good Range and the IBS Station is Running well. No issues on incvisu.

Does anyone have Same Problems?

So please let me know how i can Check what is Happening...
Commands to trace the Call?
Is there a command to See which DECTS set are on which Station in real time?

Thank you




Gesendet von iPhone mit Tapatalk

about command - dectview
dectview ibs, dectview com (etc)

I know another problem (except Out of range)
- many people nearby DECT base station with 3 channel
- problem with synchronization (when IBS DECT stations connected to different IP MG)

maybe dectobs give you some information.

regards...


--- back to basics... focus your eyes to the essential things... ---

Soved it.
The Problem was in duplicated configuration.
After switching to CPU B, everything was fine.
Switching back to A Problem the same.

Did master copy B to A and all was good on CPU A.
IN incvisu i saw, that CPU installed after mastercopy a patch...

Very strange....