Set type is changed after execute "Set Out of service"

Post Reply
pavelnt
Member
Posts: 16
Joined: 08 Nov 2014 03:51
Location: Russia

Set type is changed after execute "Set Out of service"

Post by pavelnt »

Hello!

User uses IP Touch 4038/4068. Set type is changed on 4039 when user type prefix "Set In/Out of service" and password to release the phone.
Set type is correct after "Set In of service".
Why does it happen? Is it correct behavior?

Thanks!
Top
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:
Contact cavagnaro

Re: Set type is changed after execute "Set Out of service"

Post by cavagnaro »

Is kinda a bug...happens but I think it fixes itself after you put the set in service again

Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Top
Post Reply

Return to “Translator”