4059EE Attendant IP Duplicate

Post Reply
enrique.man
Member
Posts: 89
Joined: 18 Jul 2008 17:33

4059EE Attendant IP Duplicate

Post by enrique.man » 17 Oct 2019 22:43

Hello guys,

I´ve just installed a 4059EE IP Attendant on a pc , but to work it requires an associate set, the reason i´m not sure. I´ve associate a physical IP phone 4008 and it works fine, so i tried to install on the same pc a softphone 8028 and associate it to the 4059EE IP Attendant and it work! however when looking at the mac address of all the phones in the pbx using command ippstat it shows 1 duplicate address.

Is that ok ? the pbx to have a duplicate address? can i have the attendant 4059EE and a softphone 8028 on the same pc working?

Hope somebody can answer my doubt.

Regards
Enrique

bjin
Member
Posts: 73
Joined: 14 May 2007 15:19
Location: Sweden
Contact:

Re: 4059EE Attendant IP Duplicate

Post by bjin » 01 Dec 2019 06:42

Each application, EE/Softphone/..., appends a unique identifier (=byte) to the macaddress letting oxe determine which application it is.
This ”mac address” is sent in the initial tftp request.
So there isnt a conflict. I guess ippstat hides the unique byte causing confusion.

/Bjarne
-: I also have a UDP joke, but you might not get it :-

Post Reply

Return to “Attendant”