Hi:
My 4059EE was working correctly in W10 pro 64b but after to install the last updates of Windows the 4059EE not work.
“omnipcx communication failure SS_SBC_EXTENDED:L3OPEN, L2 protocol init failed”
Anybody in the world has this issue ???
Thanks
4059EE KO after windows updates
Re: 4059EE KO after windows updates
Hello,
Is Windows Firewall enabled?
If so, try to disable it temporary.
Is Windows Firewall enabled?
If so, try to disable it temporary.
Re: 4059EE KO after windows updates
NO firewall and antivirus enabled.
Thanks
Thanks
Re: 4059EE KO after windows updates
Did you try to reinstall application? Is you Windows 10 version 1607/1703?
Could you collect very verbose traces?
Could you collect very verbose traces?
Re: 4059EE KO after windows updates
Hi,
Yes, this updates.
Find attached the traces
Thanks
Yes, this updates.
Find attached the traces
Thanks
You do not have the required permissions to view the files attached to this post.
Re: 4059EE KO after windows updates
It's really strange.
May be client doesn't send "acknowledgement" to PBX.
If firewalls and antivirus on client machine are disabled... could you try remove TFTP client feature and add again after reboot?
Sorry, don't have another ideas.
May be client doesn't send "acknowledgement" to PBX.
If firewalls and antivirus on client machine are disabled... could you try remove TFTP client feature and add again after reboot?
Sorry, don't have another ideas.
Re: 4059EE KO after windows updates
The same issue after that.
Don´t worry paveInt, thanks for your help.
Kind Regards
Don´t worry paveInt, thanks for your help.
Kind Regards
Re: 4059EE KO after windows updates
SOLVED !!!
desable the adapter wifi-bluthoot, no connect but after desable all is working
desable the adapter wifi-bluthoot, no connect but after desable all is working