i've been trying to build a simple configuration with the new Call Routing Group (CRG) feature.
there are 3 mobile 300 sets (301, 304, 334).
CRG 1 contains:
Code: Select all
┌─Review/Modify: Call Routing Group ────────────────────────────────────────────────────────────────────┐
│ │
│ Routing Group Number : 1 │
│ │
│ Name : test0 │
│ │
│ Call Distribution │
│ │
│ 1st Extension Routing : 304 │
│ 2nd Extension Routing : 334 │
│ │
│ Routing group parameters │
│ │
│ Overflow Timer : 25 │
│ Overflow on voice mail + False │
│ │
└───────────────────────────────────────────────────────────────────────────────────────────────────────┘
CRG 2 contains:
Code: Select all
┌─Review/Modify: Call Routing Group ────────────────────────────────────────────────────────────────────┐
│ │
│ Routing Group Number : 2 │
│ │
│ Name : test1 │
│ │
│ Call Distribution │
│ │
│ 1st Extension Routing : 301 │
│ 2nd Extension Routing : 334 │
│ │
│ Routing group parameters │
│ │
│ Overflow Timer : 25 │
│ Overflow on voice mail + False │
│ │
└───────────────────────────────────────────────────────────────────────────────────────────────────────┘
In Subscriber 301 is managed:
Code: Select all
┌─Review/Modify: Dynamic State User────────────────────────────────────┐
│ │
│ Directory Number : 301 │
│ │
│ Overflow on associate + True │
│ Overfl.busy to assoc.set + True │
│ Associated Set No. : 337 │
│ │
└──────────────────────────────────────────────────────────────────────┘
Code: Select all
┌─Review/Modify: Dynamic State User────────────────────────────────────┐
│ │
│ Directory Number : 304 │
│ │
│ Overflow on associate + True │
│ Overfl.busy to assoc.set + True │
│ Associated Set No. : 307 │
│ │
└──────────────────────────────────────────────────────────────────────┘
If someone calls subscriber 301:
Code: Select all
301 rings ---after busy or free set---> 304 rings ---after busy or free set---> 334 rings
If someone calls subscriber 304:
Code: Select all
304 rings ---after busy or free set---> 301 rings ---after busy or free set---> 334 rings
The problem at the Moment is... i'll get an incident if the sets 301 and 302 are busy.
Code: Select all
02/12/12 15:21:05 000001M|---/--/-/---|=2:1724=Equipment in a loop, PC 0x08757ce0 neqt 1421 evt 10
Code: Select all
incinfo GEA 1724
INCIDENT NUMBER: 1724
Network indicator: Alcatel 4400
OBJECT CLASS: Dhs3x_node
EVENT TYPE: ProcessingErrorAlarm (10)
PROBABLE CAUSE: Unknown (0)
SEVERITY: Major
"Equipment in a loop, PC 0xP1P2 neqt P3 evt P4"
"P1 : Called function address, MSW"
"P2 : Called function address, LSW"
"P3 : Number of the active piece of equipment"
"P4 : Event number"
"This equipment is involved in a loop of events. It is stopped by"
"monitel in order to suppress the loop."
"The faulty half-communication, cleaned and released, is recovered by the"
"telephone application defence mechanism. The waiting logical events"
"are not processed."
"Note the incident with all its information on an observation sheet"
"(problem report), specifying if possible the error context.";
Also if i have trouble with only one simple CRG and all users are busy.
In this case allways ISDN Cause 41dez. (Temporary failure) will be sent instead of ISDN Cause 17dez. (User busy)
Is there anybody out there, who has expierience with CRG Feature?
Is there another solution to build such a configuration?
Thanks for all answers and regards...