Speed dial name appearance on incoming call

Post Reply
User avatar
torrentula
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 814
Joined: 29 Jun 2007 14:05

Speed dial name appearance on incoming call

Post by torrentula » 31 Mar 2008 18:29

I have an OXE R7.0 connected via PRI link to an old ROLM system. We have calling number working fine, but they want to see the user name when someone from the ROLM calls the OXE.

I thought I could create speed dials of the ROLM users extensions and the OXE would match the dialing extension to the speed dial and display the phone book name but it didn't work...

Is this possible? What am I missing here?

Thanks!

zanex
Member
Posts: 395
Joined: 23 Feb 2007 00:32
Location: sydney
Contact:

Re: Speed dial name appearance on incoming call

Post by zanex » 31 Mar 2008 19:41

Dont know what ROLM but i have two private PRI links (Cisco GW and GSM GW) and i use speed dials for name display on the alcatel for calls comming from the older systems as QSIG over H323 doesnt work some times or i just lost patience with it
Not All Those Who Wander Are Lost

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3434
Joined: 23 Sep 2004 06:47
Location: Russia

Re: Speed dial name appearance on incoming call

Post by vad » 31 Mar 2008 22:25

You can use speed dial for name but you need to check:
1) calling number must begin from prefix exist in ext. callback translation (digits to add);
2) digits after prefix= what you see on set display (number in common not really recieved but after callback translation).
And can you show incoming trace (with t3 command).

User avatar
torrentula
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 814
Joined: 29 Jun 2007 14:05

Re: Speed dial name appearance on incoming call

Post by torrentula » 31 Mar 2008 22:31

Thanks for the input. I am only getting the extension number, no prefix information is being received so I will make some additions to the ext callback and see what happens.

Thanks!

User avatar
giovanni.attolini
Member
Posts: 270
Joined: 16 Apr 2009 13:44
Location: Veranopolis-RS-BRAZIL
Contact:

Re: Speed dial name appearance on incoming call

Post by giovanni.attolini » 19 May 2015 14:44

Hi for all,

In my case is working normally the "external call name presentation" using speed dial. Anyone knows if is possible to show this name in unanswered calls list? I did some tests here and the name is presented when the call is incoming, but if the user doesn't answer the call, the message in unanswered calls list contains only the number of the calling party.
Giovanni A. Attolini
https://www.facebook.com/gio.atto

"When you make a stupid question, wait for a stupid answer!"

samet
Member
Posts: 27
Joined: 31 Jan 2012 14:40
Contact:

Re: Speed dial name appearance on incoming call

Post by samet » 26 Dec 2015 17:33

hi ,you can do this configuration.
mgr->Speed Dialing->Spd Dl Numbers by Range-> Review/Modify-><< All instances >> ->
you can chose range 0 or other range,

Node Number (reserved) : 1
Instance (reserved) : 1
Range Number : 0 range

Index for 1st speed dial number : 1000
Length for speed dialing numbers : 200
Number of Digits : 3
Used in network + Local Node

After you cDescend hierarchy -> create


Node Number (reserved) : 1
│ Instance (reserved) : 1
│ Range Number : 0
│ Speed Dialing No. : 0

│ Call Number : ars prefix + external number
│ Directory name : for example ALCATEL
│ Directory First Name : --------------------
│ UTF-8 Directory Name : ---------------------------------------
│ UTF-8 Directory First Name : ---------------------------------------
│ Call Restrictions - Barring + False
│ Overflow Range No. : -1
│ Auto.Attendant Calling Right : 0
│ Call Type + Normal
│ Timed Overflow Range No. : -1
│ Can be Called/Dialed By Name + YES
│ Displayed Name : ALCATEL
│ External DISA Dir.No. : --------
│ Phone book Name (Dial by name) : ALCATEL
│ Phone book First Name : --------

Post Reply

Return to “Speed Dialing”