Pause in speed dials.
Pause in speed dials.
Hi all how can I put a pause into the dialled number of a speed dial , the only options I have are 0-9, *# a,b,c or d, I need to make it easy for a user to change so want to avoid using ars if poss, thanks in advance
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: Pause in speed dials.
Can't think of any method. Look here:
viewtopic.php?f=118&t=6486&hilit=speed+dial+pause
You can use command tables for ARS programming.
viewtopic.php?f=118&t=6486&hilit=speed+dial+pause
You can use command tables for ARS programming.
Re: Pause in speed dials.
Does anyone know how to setup Pause in OXE speeddial ( direct abbreviated number).
I need to setup an international (this calls an IVR and asks for extension number after 20-25 seconds) so IDD number + 20seconds pause + ext number 222.
What is the permitted characters to make this work. I have tried * and # but no luck.
Any simple suggestions of solution. Alcatel docs have no information.
Thanks
I need to setup an international (this calls an IVR and asks for extension number after 20-25 seconds) so IDD number + 20seconds pause + ext number 222.
What is the permitted characters to make this work. I have tried * and # but no luck.
Any simple suggestions of solution. Alcatel docs have no information.
Thanks
SWINSTU
ACSE OXE R12.1
ACSE 8770 R3.2(4760 R5.x)
ACSE OT R2.3 IP/SIP and UC&C
ACSE OXE R12.1
ACSE 8770 R3.2(4760 R5.x)
ACSE OT R2.3 IP/SIP and UC&C