Welcome message in QSIG scenario

[HUSSAINQCS]

Hi All,

I have two systems OXE & Avaya connected with QSIG-GF

and the calls coming to OXE forwarded to Avaya Operator console through DID translator Is it possible to configure the welcome message before the call hit on Avaya PABX. If so how to achieve this ?

First External no : 40xxxx33
Internal No : 0 (Avaya operator console)

[fery_s]

Hi All,

I have two systems OXE & Avaya connected with QSIG-GF

and the calls coming to OXE forwarded to Avaya Operator console through DID translator Is it possible to configure the welcome message before the call hit on Avaya PABX. If so how to achieve this ?

First External no : 40xxxx33
Internal No : 0 (Avaya operator console)

you can send your did to AA if you have the lisence and then forward it after playing VG

[mgoegel]

Incoming greeting guide should do it as well and much easier - and you need no license for it.

Gesendet von meinem F8331 mit Tapatalk

[HUSSAINQCS]

I made it by greeting guide thanks mgoegel for info

But when i make call to DDI number before playing the greeting guide the RBT was very fast is it possible to increase the timer for RBT before playing the greeting guide

[tgn]

no. the RBT comes from provider (most of the time).

regards...


--- back to basics... focus your eyes to the essential things... ---

[vad]

prepare guide - RBT + announcement

[HUSSAINQCS]

Can you give me some brief info how to achieve this Mr,Vad

[vad]

Write RBT into file (from analogue line or find some example in internet).
Write announcement what you want.
Combine two files - RBT + announcement (I use SoundForge SW).
Make VG project with AAS software.