OXE add digit to number

swat291
Member
Posts: 9
Joined: 09 Aug 2017 02:24

OXE add digit to number

Post by swat291 »

Could you please advise >?

Prefix number for OXE is 9
now for make extrenal call i need dial 9 9 ( and 7 digit number 1234567 )
where i can add one digit ( 9 ) between prefix and number?

Thanks in advance
User avatar
tgn
Member
Posts: 802
Joined: 30 Dec 2009 17:59
Location: Germany

Re: OXE add digit to number

Post by tgn »

ars route...
its described im docs.

regards...


--- back to basics... focus your eyes to the essential things... ---
--- back to basics... focus your eyes to the essential things... ---
User avatar
Gerry
Member
Posts: 17
Joined: 14 Jan 2010 13:59
Location: Boston, Massachusetts, USA

Re: OXE add digit to number

Post by Gerry »

In the route under digit to add, put the secondary 9 there


Sent from my iPhone using Tapatalk
swat291
Member
Posts: 9
Joined: 09 Aug 2017 02:24

Re: OXE add digit to number

Post by swat291 »

Thanks for quick answer!


I change setting is ars -
TRANLSATOR - ARS - 1 - ARS route list - - ars route - digits to add - 9

and after that when i dial 9 and 7 digits of landline - i hear voice
the number dialed is not authorized
if i dial 9 and 9 and 7 digits external call is ok.

i need to dial only 9 and 7 digits to call outside.
swat291
Member
Posts: 9
Joined: 09 Aug 2017 02:24

Re: OXE add digit to number

Post by swat291 »

And also after configuring ARS my incoming calls from e1 TG stops on cisco router with error.
swat291
Member
Posts: 9
Joined: 09 Aug 2017 02:24

Re: OXE add digit to number

Post by swat291 »

So ok.

now its working with ARS.
But now all incoming calls from e1 trunk group comes to OXE and forwarding back in trunk

I call 4272745 from land line
router convert this number to DID number 275 and send in trunk.
OXE see call from e1 trunk add 9 to number 275 and send - 9275 back in a trunk .

so its a loop until all channels in TG finish
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OXE add digit to number

Post by cavagnaro »

ARS is for outgoing calls only, not incoming
Check your rules

Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
User avatar
Gerry
Member
Posts: 17
Joined: 14 Jan 2010 13:59
Location: Boston, Massachusetts, USA

Re: OXE add digit to number

Post by Gerry »

swat291 wrote:Thanks for quick answer!


I change setting is ars -
TRANLSATOR - ARS - 1 - ARS route list - - ars route - digits to add - 9

and after that when i dial 9 and 7 digits of landline - i hear voice
the number dialed is not authorized
if i dial 9 and 9 and 7 digits external call is ok.

i need to dial only 9 and 7 digits to call outside.
If you hear the message the call is not authorized then you need to ensure the area is authorized in your access cos, assigned to the set doing the dialing and the rule defined in the discriminator rules, make sure you have a time based route list for your route.



Sent from my iPhone using Tapatalk
swat291
Member
Posts: 9
Joined: 09 Aug 2017 02:24

Re: OXE add digit to number

Post by swat291 »

cavagnaro wrote: 23 Aug 2017 11:11 ARS is for outgoing calls only, not incoming
Check your rules

Enviado de meu E6633 usando Tapatalk
Dear Cavagnaro ,
Could you please advise in which section i should search?
In Translator?
or Trunk Group settings?
or System settings?

i searched all forum and docs. no sense =(
Thanks in advance
swat291
Member
Posts: 9
Joined: 09 Aug 2017 02:24

Re: OXE add digit to number

Post by swat291 »

Here is t3 trace
(1)dss38m_cpua> t3
--> Cleaning mtracer...
--> Positionning t3 filters...
+--------+-------+--------+--------+---------+---------+----------+------+
| filter | desti | src_id | cr_nbr | cpl_nbr | us_term | term_nbr | type |
+--------+-------+--------+--------+---------+---------+----------+------+
| 0 | ** | ** | * | ** | * | *** | 165 |
| 1 | ** | ** | * | ** | * | *** | 166 |
| 2 | ** | ** | * | ** | * | *** | 167 |
| 3 | | | | | | | |
| 4 | | | | | | | |
| 5 | | | | | | | |
| 6 | | | | | | | |
| 7 | | | | | | | |
+--------+-------+--------+--------+---------+---------+----------+------+
Traces Analyser activated

mtracer started ...
(530775:000001) MTRACER host (192.168.1.10, dss38m_cpua), version: R11.0.1-k1.520-32-b-no-c82
(530775:000001) MTRACER num: 004, time: 2017/08/24 16:45:48, loss: 0%
______________________________________________________________________________
| (530960:000002) Concatenated-Physical-Event :
| long: 34 desti: 0 source: 0 cryst: 2 cpl: 6 us: 0 term: 0 type a5
| tei: 0 >>>> message received : SETUP [05] Call ref : 00 e1
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3
| IE:[18] CHANNEL (l=3) a9 83 81 -> T2 : B channel 1 exclusive
| IE:[70] CALLED_NUMBER (l=4) -> 80 Num : 275
|______________________________________________________________________________

______________________________________________________________________________
| (530960:000003) 1242: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 23 desti: 0 source: 15 cryst: 2 cpl: 6 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : SETUP ACK [0d] Call ref : 80 e1
|______________________________________________________________________________
|
| IE:[18] CHANNEL (l=3) a9 83 81 -> T2 : B channel 1 exclusive
|______________________________________________________________________________

______________________________________________________________________________
| (530960:000004) 1242: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 34 desti: 0 source: 15 cryst: 2 cpl: 6 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : SETUP [05] Call ref : 00 cd
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3
| IE:[6c] CALLING_NUMBER (l=2) -> 01 81 Num :
| IE:[70] CALLED_NUMBER (l=5) -> 81 Num : 9275
|______________________________________________________________________________

______________________________________________________________________________
| (530961:000005) Concatenated-Physical-Event :
| long: 23 desti: 0 source: 0 cryst: 2 cpl: 6 us: 0 term: 0 type a5
| tei: 0 >>>> message received : SETUP ACK [0d] Call ref : 80 cd
|______________________________________________________________________________
|
| IE:[18] CHANNEL (l=3) a9 83 82 -> T2 : B channel 2 exclusive
|______________________________________________________________________________

______________________________________________________________________________
| (531111:000006) Concatenated-Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 2 cpl: 6 us: 0 term: 0 type a5
| tei: 0 >>>> message received : CALL PROC (02) Call ref : 80 cd
|______________________________________________________________________________

______________________________________________________________________________
| (531111:000007) 1242: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 18 desti: 0 source: 15 cryst: 2 cpl: 6 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : CALL PROC (02) Call ref : 80 e1
|______________________________________________________________________________

______________________________________________________________________________
| (531161:000008) Concatenated-Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 2 cpl: 6 us: 0 term: 0 type a5
| tei: 0 >>>> message received : ALERT (01) Call ref : 80 cd
|______________________________________________________________________________
|
| IE:[1e] PROGRESS_ID (l=2) 81 81
|______________________________________________________________________________

______________________________________________________________________________
| (531161:000009) 1242: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 2 cpl: 6 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : ALERT (01) Call ref : 80 e1
|______________________________________________________________________________
|
| IE:[1e] PROGRESS_ID (l=2) 80 81
|______________________________________________________________________________

______________________________________________________________________________
| (531281:000010) Concatenated-Physical-Event :
| long: 26 desti: 0 source: 0 cryst: 2 cpl: 6 us: 0 term: 0 type a5
| tei: 0 >>>> message received : PROGRESS (03) Call ref : 80 cd
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 9c -> [9c] INVALID NUMBER FORMAT
| IE:[1e] PROGRESS_ID (l=2) 81 88
|______________________________________________________________________________

______________________________________________________________________________
| (531281:000011) 1242: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 26 desti: 0 source: 15 cryst: 2 cpl: 6 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : PROGRESS (03) Call ref : 80 e1
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 9c -> [9c] INVALID NUMBER FORMAT
| IE:[1e] PROGRESS_ID (l=2) 80 88
|______________________________________________________________________________

______________________________________________________________________________
| (531414:000012) Concatenated-Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 2 cpl: 6 us: 0 term: 0 type a5
| tei: 0 >>>> message received : DISCONNECT [45] Call ref : 80 cd
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 82 9c -> [9c] INVALID NUMBER FORMAT
|______________________________________________________________________________

______________________________________________________________________________
| (531414:000013) 1243: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 2 cpl: 6 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : DISCONNECT [45] Call ref : 80 e1
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 9c -> [9c] INVALID NUMBER FORMAT
|______________________________________________________________________________

______________________________________________________________________________
| (531414:000014) 1242: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 2 cpl: 6 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : RELEASE [4d] Call ref : 00 cd
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 90 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________

______________________________________________________________________________
| (531414:000015) Concatenated-Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 2 cpl: 6 us: 0 term: 0 type a5
| tei: 0 >>>> message received : RELEASE [4d] Call ref : 00 e1
|______________________________________________________________________________

______________________________________________________________________________
| (531414:000016) 1242: Send_IO1 (link-nbr=1, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 2 cpl: 6 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : REL COMP [5a] Call ref : 80 e1
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 90 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________

______________________________________________________________________________
| (531415:000017) Concatenated-Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 2 cpl: 6 us: 0 term: 0 type a5
| tei: 0 >>>> message received : REL COMP [5a] Call ref : 80 cd
|______________________________________________________________________________
Post Reply

Return to “Trunk Groups”