QSIG trunk
QSIG trunk
Hi to all,
How can I decrease dialed digit numbers in QSIG?
Thank you
How can I decrease dialed digit numbers in QSIG?
Thank you
Re: QSIG trunk
Hi,
in the trunk group, see the parameter Nº of digits unused (ISDN)
Regards.
in the trunk group, see the parameter Nº of digits unused (ISDN)
Regards.
may the force be with you....
Re: QSIG trunk
Thank you for your response but I know this, let me to explain you exactly. Look, I have to number 8000 and 08000 that their destination is different and 08000 should be convert to 8000 and then route, how can I configure this?
Re: QSIG trunk
I have 4 SW, that ALcatel is a transit between 3 of them.
SW Ericsson 1(First Phase)
SW Ericsson 2(Second Phase)
SW Mitel(Third Phase)
there is a trunk between Alcatel and SW Ericsson 1
there is a trunk between Alcatel and SW Ericsson 2
there is a trunk between Alcatel and Mitel
there is a user 8000 in SW Ericsson 2
there is a user 08000 in Mitel that alcatel should delete 0 before ringing in mitel
the problem is that when a user in SW Ericsson 1 Calling 8000 or 08000 the user in SW Ericsson 2 Will ring
I don't know how can I define for Alcatel that when someone called 08000 the user in Mitel have to ring.
I attached the digram.
Please Help..
SW Ericsson 1(First Phase)
SW Ericsson 2(Second Phase)
SW Mitel(Third Phase)
there is a trunk between Alcatel and SW Ericsson 1
there is a trunk between Alcatel and SW Ericsson 2
there is a trunk between Alcatel and Mitel
there is a user 8000 in SW Ericsson 2
there is a user 08000 in Mitel that alcatel should delete 0 before ringing in mitel
the problem is that when a user in SW Ericsson 1 Calling 8000 or 08000 the user in SW Ericsson 2 Will ring
I don't know how can I define for Alcatel that when someone called 08000 the user in Mitel have to ring.
I attached the digram.
Please Help..
You do not have the required permissions to view the files attached to this post.
Re: QSIG trunk
0 in alcatel should be traduced as tg seizure or routing n° via tg Alcatel and mittel)?
what it the current config of 0 , why 8000 in sw2 rings when you 8000 mittel?
what it the current config of 0 , why 8000 in sw2 rings when you 8000 mittel?
Re: QSIG trunk
ALcatel delete 0 from 08000 at first before sending and it routs to SW Ericsson 2.
I defined a discriminator to delete 0 and it works but doen't rout in the right way.how should I tell to Alcatel that first rout 08000 to Mitel then delete 0?
I defined a discriminator to delete 0 and it works but doen't rout in the right way.how should I tell to Alcatel that first rout 08000 to Mitel then delete 0?
Re: QSIG trunk
trkg between alcatel and mittel should be private
0 in alcatel should trkgp seize prefix for that trunkgp.
number of digit to send 4 or manage dialing compatibility
sw1 08000-----> alcatel traduces 0 as trkgp seizure for mittel
if all evrything is allowed he will set 8000 to mittel
"the problem is that when a user in SW Ericsson 1 Calling 8000 or 08000 the user in SW Ericsson 2 Will ring"
are u using DDI ?
WHAT actually 0 means in alcatel ?
-...
0 in alcatel should trkgp seize prefix for that trunkgp.
number of digit to send 4 or manage dialing compatibility
sw1 08000-----> alcatel traduces 0 as trkgp seizure for mittel
if all evrything is allowed he will set 8000 to mittel
"the problem is that when a user in SW Ericsson 1 Calling 8000 or 08000 the user in SW Ericsson 2 Will ring"
are u using DDI ?
WHAT actually 0 means in alcatel ?
-...
Re: QSIG trunk
there are some of my configuration
You do not have the required permissions to view the files attached to this post.
Re: QSIG trunk
and what's 08000 definition at alcatel side Abrv number?! a t3 trace call could help
should be simple transit call no need for ddi translation of that range , you need only to ddi translate the sw2 numbers if it's necessary .
i ur case i'wll not use ddi translation it's not necessary
alcatel side
80xx should network number or 80 as routing number to sw2
0 trgseize of the mittel trkg
sw1 send 8000 to alcatel wich will analyse and send them to sw2
sw 1 send 08000 alcatel will analyse, found 0 will seize trunk group to mittel for sw1 (ifautohrised) and send 8000 forward to mittel .
should be simple transit call no need for ddi translation of that range , you need only to ddi translate the sw2 numbers if it's necessary .
i ur case i'wll not use ddi translation it's not necessary
alcatel side
80xx should network number or 80 as routing number to sw2
0 trgseize of the mittel trkg
sw1 send 8000 to alcatel wich will analyse and send them to sw2
sw 1 send 08000 alcatel will analyse, found 0 will seize trunk group to mittel for sw1 (ifautohrised) and send 8000 forward to mittel .