Grandstream <> OXE <> Samsung problem

Post Reply
Hukaparya
Member
Posts: 4
Joined: 21 Oct 2015 07:55

Grandstream <> OXE <> Samsung problem

Post by Hukaparya »

Hello, everyone!
Please help!
I have an OXE with Samsung officeserv connected via PRI.Everything works.

Now I had connected Grandstream PBX to OXE via NPRAE board.
Calls from Grandstream to OXE and back works fine, but calls from Grandstream to Samsung doesn't work.
On Grandstream phone it's just a long beep, and "TALKING" on the screen.
I can see, that the call is coming to Samsung's trunk, but nothing happens.

Here is a trace of a call. NORMAL CALL CLEARING appears when I put down the handset.

Code: Select all

| (278468:000002) 1096: Send_IO1 (link-nbr=19, sapi=0, tei=0) :
| long: 52  desti: 0  source: 15  cryst: 0  cpl: 19  us: 8  term: 0  type a5
| tei: 0  <<<<  message sent : SETUP [05]    Call ref :  32 22
|                               SENDING COMPLETE
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3
| IE:[18] CHANNEL (l=3)  a1 83 86 -> T2 : B channel 6 preferred
| IE:[1e] PROGRESS_ID (l=2) a0 90
| IE:[6c] CALLING_NUMBER (l=6)  ->  00  81  Num : 4205
| IE:[70] CALLED_NUMBER (l=5)  ->  89  Num : 2211
| [95] Locking shift. codeset : 5
| IE:[32] EI_PARTY_CATEGORY (l=1)  -> UNKNOWN (0)
|______________________________________________________________________________

 ______________________________________________________________________________
| (278468:000003) Concatenated-Physical-Event :
| long: 23  desti: 0  source: 0  cryst: 0  cpl: 19  us: 0  term: 0  type a5
| tei: 0  >>>>  message received : CALL PROC (02)  Call ref :  b2 22
|______________________________________________________________________________
|
| IE:[18] CHANNEL (l=3)  a9 83 86 -> T2 : B channel 6 exclusive
|______________________________________________________________________________

 ______________________________________________________________________________
| (278468:000004) Concatenated-Physical-Event :
| long: 18  desti: 0  source: 0  cryst: 0  cpl: 19  us: 0  term: 0  type a5
| tei: 0  >>>>  message received : CONNECT (07)  Call ref :  b2 22
|______________________________________________________________________________

 ______________________________________________________________________________
| (278468:000005) 1096: Send_IO1 (link-nbr=19, sapi=0, tei=0) :
| long: 18  desti: 0  source: 15  cryst: 0  cpl: 19  us: 8  term: 0  type a5
| tei: 0  <<<<  message sent : CONNECT ACK (0f)  Call ref :  32 22
|______________________________________________________________________________

 ______________________________________________________________________________
| (278501:000006) 1096: Send_IO1 (link-nbr=19, sapi=0, tei=0) :
| long: 23  desti: 0  source: 15  cryst: 0  cpl: 19  us: 8  term: 0  type a5
| tei: 0  <<<<  message sent : DISCONNECT [45]  Call ref :  32 22
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 80 90 80 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________

 ______________________________________________________________________________
| (278502:000007) Concatenated-Physical-Event :
| long: 18  desti: 0  source: 0  cryst: 0  cpl: 19  us: 0  term: 0  type a5
| tei: 0  >>>>  message received : RELEASE [4d]   Call ref :  b2 22
|______________________________________________________________________________

 ______________________________________________________________________________
| (278502:000008) 1096: Send_IO1 (link-nbr=19, sapi=0, tei=0) :
| long: 23  desti: 0  source: 15  cryst: 0  cpl: 19  us: 8  term: 0  type a5
| tei: 0  <<<<  message sent : REL COMP [5a]  Call ref :  32 22
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 80 90 80 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________


And here is a trace of a normal, working call from OXE

Code: Select all

 ______________________________________________________________________________
| (270279:000002) 1100: Send_IO1 (link-nbr=19, sapi=0, tei=0) :
| long: 51  desti: 0  source: 15  cryst: 0  cpl: 19  us: 8  term: 0  type a5
| tei: 0  <<<<  message sent : SETUP [05]    Call ref :  32 02
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3
| IE:[18] CHANNEL (l=3)  a1 83 9c -> T2 : B channel 28 preferred
| IE:[6c] CALLING_NUMBER (l=6)  ->  09  81  Num : 1540
| IE:[70] CALLED_NUMBER (l=5)  ->  89  Num : 2211
| IE:[7d] HLC (l=2) 91 81
| [95] Locking shift. codeset : 5
| IE:[32] EI_PARTY_CATEGORY (l=1)  -> EXTENSION (1)
|______________________________________________________________________________

 ______________________________________________________________________________
| (270279:000003) Concatenated-Physical-Event :
| long: 23  desti: 0  source: 0  cryst: 0  cpl: 19  us: 0  term: 0  type a5
| tei: 0  >>>>  message received : SETUP ACK [0d]  Call ref :  b2 02
|______________________________________________________________________________
|
| IE:[18] CHANNEL (l=3)  a9 83 9c -> T2 : B channel 28 exclusive
|______________________________________________________________________________

 ______________________________________________________________________________
| (270281:000004) Concatenated-Physical-Event :
| long: 22  desti: 0  source: 0  cryst: 0  cpl: 19  us: 0  term: 0  type a5
| tei: 0  >>>>  message received : PROGRESS (03)  Call ref :  b2 02
|______________________________________________________________________________
|
| IE:[1e] PROGRESS_ID (l=2) 81 83
|______________________________________________________________________________

 ______________________________________________________________________________
| (270282:000005) Concatenated-Physical-Event :
| long: 22  desti: 0  source: 0  cryst: 0  cpl: 19  us: 0  term: 0  type a5
| tei: 0  >>>>  message received : ALERT (01)  Call ref :  b2 02
|______________________________________________________________________________
|
| IE:[1e] PROGRESS_ID (l=2) 81 88
|______________________________________________________________________________

As I understand, problem is with "IE:[32] EI_PARTY_CATEGORY (l=1) -> UNKNOWN (0)", but I dont know, where can I change it.
Backside calls to Grandstream from Samsung doesn't work too, it even doesn't come to a trunk, saying "the wrong number", but, i understand it's Samsung's problem and question not for this forum...

Will be appreciate for help!
Post Reply

Return to “Trunk Groups”