Trunk line - lockout status
- letacla21/2
- Member
- Posts: 13
- Joined: 14 Nov 2010 10:28
Trunk line - lockout status
Hi all,
Any one tell me how could i identify the issues,why the trunk line gets into a lockout state, below are the alarms:
16/11/10 13:22:45 000001M|000/14/0/002|=4:0279=Shift into line lockout status
16/11/10 13:12:18 000001M|000/08/0/011|=4:0279=Shift into line lockout status
16/11/10 10:52:15 000001M|000/16/0/014|=4:0279=Shift into line lockout status
16/11/10 10:52:11 000001M|000/01/0/017|=4:0279=Shift into line lockout status
16/11/10 09:33:19 000001M|000/14/0/002|=4:0279=Shift into line lockout status
16/11/10 09:21:37 000001M|000/08/0/009|=4:0279=Shift into line lockout status
16/11/10 01:19:02 000001M|000/01/0/005|=4:0279=Shift into line lockout status
15/11/10 23:23:30 000001M|000/08/0/003|=4:0279=Shift into line lockout status
15/11/10 22:02:52 000001M|000/01/0/009|=4:0279=Shift into line lockout status
15/11/10 19:07:18 000001M|000/01/0/004|=4:0279=Shift into line lockout status
15/11/10 18:36:40 000001M|000/08/0/003|=4:0279=Shift into line lockout status
15/11/10 18:10:13 000001M|000/01/0/022|=4:0279=Shift into line lockout status
15/11/10 17:17:40 000001M|000/01/0/004|=4:0279=Shift into line lockout status
15/11/10 11:58:36 000001M|000/01/0/007|=4:0279=Shift into line lockout status
15/11/10 10:03:09 000001M|000/08/0/009|=4:0279=Shift into line lockout status
15/11/10 06:48:34 000001M|000/10/0/018|=4:0279=Shift into line lockout status
15/11/10 06:18:47 000001M|000/01/0/000|=4:0279=Shift into line lockout status
15/11/10 00:17:21 000001M|000/14/0/017|=4:0279=Shift into line lockout status
14/11/10 19:19:51 000001M|000/01/0/018|=4:0279=Shift into line lockout status
14/11/10 18:35:40 000001M|000/03/0/006|=4:0279=Shift into line lockout status
14/11/10 17:58:26 000001M|000/03/0/006|=4:0279=Shift into line lockout status
But the trunk cards is in Slot 2,11 & 1 trunk grp is configured and the system info :
CPU type : cpu7
Linux version : 62.3
Delivery software version : h1.301 ;
Patch version : 28 ;
Dynamic patch version : b ;
MAO software version : H1.301.28 ;
Software Version Name : R9.0 ;
config :
+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 0 | 0 | UA32|---------- | IN SERVICE | 3BA53050ABBC01 |
| 0 | 1 | Z24_2|---------- | IN SERVICE | 3BA53065NACF03 |
| 0 | 2 | NDDI|---------- | IN SERVICE | 3BA53095AWBB02 |
| 0 | 3 | Z24_2|---------- | IN SERVICE | 3BA53065NACF03 |
| 0 | 5 | eZ32|---------- | IN SERVICE | 3BA23265ABCB04 |
| 0 | 6 | CPU7_STEP2|---------- | IN SERVICE | BAD PCMS CODE |
| 0 | 7 | IO2N|---------- | IN SERVICE | 3BA23190ABKD02 |
| 0 | 8 | Z24_2|---------- | IN SERVICE | 3BA53065NACF03 |
| 0 | 10 | Z24_2|---------- | IN SERVICE | 3BA53065NACF03 |
| 0 | 11 | NDDI|---------- | IN SERVICE | 3BA53095ADBB04 |
| 0 | 12 | Z24|---------- | IN SERVICE | 3BA53065AFBA02 |
| 0 | 13 | MMSFD|---------- |ONLY MAO FILE | BAD PCMS CODE |
| 0 | 14 | Z24_2|---------- | IN SERVICE | 3BA53065NACF03 |
| 0 | 15 | Z24|---------- | REG NOT INIT | BAD PCMS CODE |
| 0 | 16 | Z24|---------- | IN SERVICE | 3BA53065AFBA02 |
| 0 | 17 | GPA2|---------- | IN SERVICE | 3BA23241AAJC05 |
| 0 | 20 | CPU7_STEP2|---------- | IN SERVICE | BAD PCMS CODE |
| 0 | 21 | IO2N|---------- | IN SERVICE | BAD PCMS CODE |
| 0 | 23 | Z24|---------- | IN SERVICE | 3BA53065AFBA02 |
| 0 | 24 | NPRAE|---------- | IN SERVICE | 3BA23254ABJE02 |
| 0 | 25 | Z24_2|---------- | REG NOT INIT | BAD PCMS CODE |
| 0 | 26 | UA16|---------- | REG NOT INIT | BAD PCMS CODE |
| 0 | 27 | Z12|---------- | IN SERVICE | 3BA53071AFBA02 |
+-------------------------------------------------------------------+
thanks
Any one tell me how could i identify the issues,why the trunk line gets into a lockout state, below are the alarms:
16/11/10 13:22:45 000001M|000/14/0/002|=4:0279=Shift into line lockout status
16/11/10 13:12:18 000001M|000/08/0/011|=4:0279=Shift into line lockout status
16/11/10 10:52:15 000001M|000/16/0/014|=4:0279=Shift into line lockout status
16/11/10 10:52:11 000001M|000/01/0/017|=4:0279=Shift into line lockout status
16/11/10 09:33:19 000001M|000/14/0/002|=4:0279=Shift into line lockout status
16/11/10 09:21:37 000001M|000/08/0/009|=4:0279=Shift into line lockout status
16/11/10 01:19:02 000001M|000/01/0/005|=4:0279=Shift into line lockout status
15/11/10 23:23:30 000001M|000/08/0/003|=4:0279=Shift into line lockout status
15/11/10 22:02:52 000001M|000/01/0/009|=4:0279=Shift into line lockout status
15/11/10 19:07:18 000001M|000/01/0/004|=4:0279=Shift into line lockout status
15/11/10 18:36:40 000001M|000/08/0/003|=4:0279=Shift into line lockout status
15/11/10 18:10:13 000001M|000/01/0/022|=4:0279=Shift into line lockout status
15/11/10 17:17:40 000001M|000/01/0/004|=4:0279=Shift into line lockout status
15/11/10 11:58:36 000001M|000/01/0/007|=4:0279=Shift into line lockout status
15/11/10 10:03:09 000001M|000/08/0/009|=4:0279=Shift into line lockout status
15/11/10 06:48:34 000001M|000/10/0/018|=4:0279=Shift into line lockout status
15/11/10 06:18:47 000001M|000/01/0/000|=4:0279=Shift into line lockout status
15/11/10 00:17:21 000001M|000/14/0/017|=4:0279=Shift into line lockout status
14/11/10 19:19:51 000001M|000/01/0/018|=4:0279=Shift into line lockout status
14/11/10 18:35:40 000001M|000/03/0/006|=4:0279=Shift into line lockout status
14/11/10 17:58:26 000001M|000/03/0/006|=4:0279=Shift into line lockout status
But the trunk cards is in Slot 2,11 & 1 trunk grp is configured and the system info :
CPU type : cpu7
Linux version : 62.3
Delivery software version : h1.301 ;
Patch version : 28 ;
Dynamic patch version : b ;
MAO software version : H1.301.28 ;
Software Version Name : R9.0 ;
config :
+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 0 | 0 | UA32|---------- | IN SERVICE | 3BA53050ABBC01 |
| 0 | 1 | Z24_2|---------- | IN SERVICE | 3BA53065NACF03 |
| 0 | 2 | NDDI|---------- | IN SERVICE | 3BA53095AWBB02 |
| 0 | 3 | Z24_2|---------- | IN SERVICE | 3BA53065NACF03 |
| 0 | 5 | eZ32|---------- | IN SERVICE | 3BA23265ABCB04 |
| 0 | 6 | CPU7_STEP2|---------- | IN SERVICE | BAD PCMS CODE |
| 0 | 7 | IO2N|---------- | IN SERVICE | 3BA23190ABKD02 |
| 0 | 8 | Z24_2|---------- | IN SERVICE | 3BA53065NACF03 |
| 0 | 10 | Z24_2|---------- | IN SERVICE | 3BA53065NACF03 |
| 0 | 11 | NDDI|---------- | IN SERVICE | 3BA53095ADBB04 |
| 0 | 12 | Z24|---------- | IN SERVICE | 3BA53065AFBA02 |
| 0 | 13 | MMSFD|---------- |ONLY MAO FILE | BAD PCMS CODE |
| 0 | 14 | Z24_2|---------- | IN SERVICE | 3BA53065NACF03 |
| 0 | 15 | Z24|---------- | REG NOT INIT | BAD PCMS CODE |
| 0 | 16 | Z24|---------- | IN SERVICE | 3BA53065AFBA02 |
| 0 | 17 | GPA2|---------- | IN SERVICE | 3BA23241AAJC05 |
| 0 | 20 | CPU7_STEP2|---------- | IN SERVICE | BAD PCMS CODE |
| 0 | 21 | IO2N|---------- | IN SERVICE | BAD PCMS CODE |
| 0 | 23 | Z24|---------- | IN SERVICE | 3BA53065AFBA02 |
| 0 | 24 | NPRAE|---------- | IN SERVICE | 3BA23254ABJE02 |
| 0 | 25 | Z24_2|---------- | REG NOT INIT | BAD PCMS CODE |
| 0 | 26 | UA16|---------- | REG NOT INIT | BAD PCMS CODE |
| 0 | 27 | Z12|---------- | IN SERVICE | 3BA53071AFBA02 |
+-------------------------------------------------------------------+
thanks
- letacla21/2
- Member
- Posts: 13
- Joined: 14 Nov 2010 10:28
Hi letacla
The problem is with analog sets, see the incinfo:
Incident number (q to quit):0279
INCIDENT NUMBER: 279
Network indicator: Alcatel 4400
OBJECT CLASS: Dhs3Terminal
EVENT TYPE: ProcessingErrorAlarm (10)
PROBABLE CAUSE: Unknown (0)
SEVERITY: Warning
"Shift into line lockout status"
"Analog station shift into line lockout status"
"Analog station in line lockout status. When the set returns to"
"the normal status, no other additional messages are edited."
"No system reaction"
"No operator action required";
All the boards in your alarms are Z boards. It seems like the phone offhook too much time.
Vad, do you agree with this explanation?
Regards.
The problem is with analog sets, see the incinfo:
Incident number (q to quit):0279
INCIDENT NUMBER: 279
Network indicator: Alcatel 4400
OBJECT CLASS: Dhs3Terminal
EVENT TYPE: ProcessingErrorAlarm (10)
PROBABLE CAUSE: Unknown (0)
SEVERITY: Warning
"Shift into line lockout status"
"Analog station shift into line lockout status"
"Analog station in line lockout status. When the set returns to"
"the normal status, no other additional messages are edited."
"No system reaction"
"No operator action required";
All the boards in your alarms are Z boards. It seems like the phone offhook too much time.
Vad, do you agree with this explanation?
Regards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
- letacla21/2
- Member
- Posts: 13
- Joined: 14 Nov 2010 10:28
- letacla21/2
- Member
- Posts: 13
- Joined: 14 Nov 2010 10:28