Remote Desktop thru ABC-F tunnel
-
- Member
- Posts: 49
- Joined: 25 Nov 2013 08:26
Re: Remote Desktop thru ABC-F tunnel
Dear vad
your procedure also worked on omnivista 4760 ,how to configure node 2 on omnivista 4760 . in my case 4760 installed pc directly connected with node 1 and node 2 through ip/x25 connected with node 1.please confirm the complete procedure.
advance thanks
your procedure also worked on omnivista 4760 ,how to configure node 2 on omnivista 4760 . in my case 4760 installed pc directly connected with node 1 and node 2 through ip/x25 connected with node 1.please confirm the complete procedure.
advance thanks
-
- Member
- Posts: 49
- Joined: 25 Nov 2013 08:26
Re: Remote Desktop thru ABC-F tunnel
on these procedure i m facing problem when i access my node 2 through omnivista 4760 connection failure wrong ip of pcx error display my ip addressing is under.
pc = 10.253.1.10 netmask=255.0.0.0
node1 = 10.253.1.3 netmask=255.0.0.0
tunnel = 172.30.253.1 netmask=255.255.0.0
static route =10.253.2.0 subnet=255.0.0.0 gateway=172.30.253.2 created in node 1
node2 =10.253.2.3 netmask=255.0.0.0
tunnel =172.30.253.2 netmask=255.255.0.0
static route =10.253.1.0 subnet=255.0.0.0 gateway=172.30.253.1 created in node2
any fault ? any any other settings pls
best regards
pc = 10.253.1.10 netmask=255.0.0.0
node1 = 10.253.1.3 netmask=255.0.0.0
tunnel = 172.30.253.1 netmask=255.255.0.0
static route =10.253.2.0 subnet=255.0.0.0 gateway=172.30.253.2 created in node 1
node2 =10.253.2.3 netmask=255.0.0.0
tunnel =172.30.253.2 netmask=255.255.0.0
static route =10.253.1.0 subnet=255.0.0.0 gateway=172.30.253.1 created in node2
any fault ? any any other settings pls
best regards
-
- Member
- Posts: 49
- Joined: 25 Nov 2013 08:26
Re: Remote Desktop thru ABC-F tunnel
now i m connected my remote nodes through omnivista 4760, only change netmask 255.0.0.0 to 255.255.255.0 of nodes and pc