Moxa Box configuration
-
- Member
- Posts: 293
- Joined: 21 Jan 2017 02:57
Moxa Box configuration
I need to install MOXA box 5410 with OXE
Can anyone tell me the TC for that ?
Can anyone tell me the TC for that ?
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: Moxa Box configuration
System documentation covers that.
-
- Member
- Posts: 293
- Joined: 21 Jan 2017 02:57
Re: Moxa Box configuration
Will cross over cable (DB9 -DB9)work for interfacing PMS with OXE through serial ?
-
- Member
- Posts: 293
- Joined: 21 Jan 2017 02:57
Re: Moxa Box configuration
Can anybody tell me which cable we can buy to connect MOXA with PMS through serial Please
-
- Member
- Posts: 293
- Joined: 21 Jan 2017 02:57
Re: Moxa Box configuration
We need to make cross over cable or straight cable DB9-DB9 ?
Please somebody can tell me first time doing the MOXA PMS integration
Please somebody can tell me first time doing the MOXA PMS integration
Re: Moxa Box configuration
As per my recent experience, you should make a cable as per below diagram...I struggled a lot with ready made cables finally this one worked...
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 293
- Joined: 21 Jan 2017 02:57
Re: Moxa Box configuration
Hi Junooni,
Thanks for your support,
oxe-----MOXA----(serial)TMS-(TCP/IP)-----Fidelio
Actually i have cross over cable we are going to interfacing OXE with PMS via TMS call accounting software
Have you done PMS integration like this how to manage the parameters in the oxe can you explain
Thanks for your support,
oxe-----MOXA----(serial)TMS-(TCP/IP)-----Fidelio
Actually i have cross over cable we are going to interfacing OXE with PMS via TMS call accounting software
Have you done PMS integration like this how to manage the parameters in the oxe can you explain
-
- Member
- Posts: 293
- Joined: 21 Jan 2017 02:57
Re: Moxa Box configuration
Hi,
i have a OXE interfacing with Call accounting system via serial port and CAS is interfacing with PMS through IP
Is that possible to setup one serial link from moxa to get the SMDR & PMS strings ? from OXE to Call accounting PC which is further interfaced with Fidelio through IP
In CAS we have only one serial port Please i need somebody advice
CAS software : TMS tiger
PMS : Fidelio
i have a OXE interfacing with Call accounting system via serial port and CAS is interfacing with PMS through IP
Is that possible to setup one serial link from moxa to get the SMDR & PMS strings ? from OXE to Call accounting PC which is further interfaced with Fidelio through IP
In CAS we have only one serial port Please i need somebody advice
CAS software : TMS tiger
PMS : Fidelio
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: Moxa Box configuration
I think this is possible. Check the system documentation regarding serial port configuration.
-
- Member
- Posts: 293
- Joined: 21 Jan 2017 02:57
Re: Moxa Box configuration
I was doing the PMS integration through MOXA with TMS tiger Call accounting system (Middleware)\
And TMS is connected with MOXA through serial what is the interface need to select either standard or Master
And TMS is connected with MOXA through serial what is the interface need to select either standard or Master