OXE with Guest Management

[junoooni]

Hi Gurus

I have installed an OXE where all guest rooms have analog extensions. I understand from product limit document that we can connect maximum 3 x Analog phone to a z port... I have 50 rooms where they need more than 3 phones, in this case, I cannot use Room Management(correct me if i am wrong)... If i use guest management:

1- Main extn will consume 1 x hotel guest set license (lock 4)
2- Secondary extension will consume 1 x hotel guest set license (lock 4)
2- Guest PIN will consume 1 x hotel guest set license (lock 4)

That mean for each guest room I'll have to create 1 x main extension and 1 x GPIN (for upto 3 phones in room) and 1 x Main Extension, 1 x secondary extensions and 1 x GPIN (For rooms with more than 3 phones)

Total count of guest rooms is 400:
350 x with 3 x analog phone
20 x with 4 x analog phones
20 x with 6 x analog phones
10 x with 7 x analog phones

Currently i have 400 x Hotel Guest Set licenses (lock 4) and while creating extensions, I ran out of lock 4 and it is giving me an error for software protection.

Does that mean i'll be needing

700 x Hotel Guest License for rooms with 3 phones
60 x Hotel Guest License for rooms with 4 phones
60 x Hotel Guest License for rooms with 6 phones
40 x Hotel Guest License for rooms with 7 phones

That is a total of 860 lic.

is this correct,?

[morio]

a z port will support upto 5 electronic ringing analog telephone sets with out any issue and you can use room management with out any problem,,