Config iptouch via telnet

Post Reply
luisitoguanes
Member
Posts: 5
Joined: 27 Nov 2012 13:29

Config iptouch via telnet

Post by luisitoguanes » 24 Jan 2013 12:47

Hi, i need to configure the 802.1x parameters from IP-Touch via telnet. The only config i could find was IP.
I search in the forum and also in the TKB, i try with the help command in the telnet connection but didn't find the way to config.
Thanks

jonvasbar
Member
Posts: 1
Joined: 17 Feb 2013 20:04

Re: Config iptouch via telnet

Post by jonvasbar » 17 Feb 2013 20:37

Hi,

I hope that the attachhed tecnical communication will be of much help you need. On page 98 is described Telnet authorization procedure on OXE.
TG0028-Ed06_IP TOUCH ISSUES.pdf
Best regards
You do not have the required permissions to view the files attached to this post.

alcatellucentryd
Member
Posts: 4
Joined: 18 Mar 2013 03:58

Re: Config iptouch via telnet

Post by alcatellucentryd » 11 Sep 2013 02:35

Hi,
I want to change extension number on iptouch 4018 phone like from 3125 to 1106.
Regards

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7004
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Config iptouch via telnet

Post by cavagnaro » 14 Sep 2013 18:57

Then use mgr can't be done on the set. Read basic documents please

Sent from my XPeria Z
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

Post Reply

Return to “Specific Telephone Services”