Hang a remote IP phone in a telnet session

Post Reply
Alcatel37
Member
Posts: 2
Joined: 08 Nov 2011 04:58

Hang a remote IP phone in a telnet session

Post by Alcatel37 » 09 Oct 2014 05:32

Hi!

I would like to know what key or combo keys that allows me to hang a remote Ip phone in a telnet session.

When I make a call from a remote Ip phone in a telnet session to a extension I don't know how to hang it and
I have to wait until it finish call by non-response.

Thanks,

User avatar
tgn
Member
Posts: 793
Joined: 30 Dec 2009 17:59
Location: Germany

Re: Hang a remote IP phone in a telnet session

Post by tgn » 09 Oct 2014 12:30

tell us how you make the call... may be we can tell you hiw to hang up the call...

regards...
--- back to basics... focus your eyes to the essential things... ---

Alcatel37
Member
Posts: 2
Joined: 08 Nov 2011 04:58

Re: Hang a remote IP phone in a telnet session

Post by Alcatel37 » 10 Oct 2014 04:23

Hi,

It's easy, when you are in a Ip phone with a telnet session make this:
e.g., you want to call to 22345 extension (you can make externals calls, if you want).

NeoPhone>Key 2 -> enter
NeoPhone>Key 2 -> enter
NeoPhone>Key 3 -> enter
NeoPhone>Key 4 -> enter
NeoPhone>Key 5 -> enter

The call is realised. It's very useful for check remote terminals.

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4020
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: Hang a remote IP phone in a telnet session

Post by tot3nkopf » 13 Oct 2014 05:32

You can use xmon command from CS command prompt also.
(xmon neqtnb 0 0 --> off hook; 2 0 on hook; 3 1 --> dials digit 1; 10 = 0 11 =* 12=#)

User avatar
tgn
Member
Posts: 793
Joined: 30 Dec 2009 17:59
Location: Germany

Re: Hang a remote IP phone in a telnet session

Post by tgn » 13 Oct 2014 07:45

never used this both before.
i prefer pilot2a (but therefore csta license is needed). with this you can press any key remotely.
it is well documented in csta v2.7.1 support and maintenance documentation.

regards...
--- back to basics... focus your eyes to the essential things... ---

jasic
Member
Posts: 140
Joined: 14 Oct 2005 09:18

Re: Hang a remote IP phone in a telnet session

Post by jasic » 30 Oct 2014 04:06

Telnet to the IP Touch ,
with the command key sim follow by the key number you can simulate key press on the set.
Hang up is key sim 12 whem I remember right. But try it.

Post Reply

Return to “Specific Telephone Services”