configuring V24 cti interface module

Post Reply
Timmie
Member
Posts: 12
Joined: 12 Jan 2014 07:34

configuring V24 cti interface module

Post by Timmie » 08 Apr 2016 05:08

Im trying to set up a V24 interface module to do call logging.
but I cant find any good info to configure this right from front to back.


the V24 needs to connect to a UA interface. ( shelf 3 board 1, mix board port 1 )
you connect the V24 to your laptop.
and after that Im lost.

what do you all need to configure.
on this site I found a little bit of info on the V24. but I cant seem the find something good of a manual.

anyone can talk me through this front to back ?

alexeik
Member
Posts: 242
Joined: 26 Apr 2007 10:47
Location: Bad Oeynhausen, germany

Re: configuring V24 cti interface module

Post by alexeik » 08 Apr 2016 07:07

i dont think that it possible to do a call logging through v.24, so that´s maybe why you find no infos

Timmie
Member
Posts: 12
Joined: 12 Jan 2014 07:34

Re: configuring V24 cti interface module

Post by Timmie » 10 Apr 2016 16:15

what about through a moxa box?

Timmie
Member
Posts: 12
Joined: 12 Jan 2014 07:34

Re: configuring V24 cti interface module

Post by Timmie » 10 Apr 2016 16:15

what about through a moxa box?

Timmie
Member
Posts: 12
Joined: 12 Jan 2014 07:34

Re: configuring V24 cti interface module

Post by Timmie » 10 Apr 2016 16:17

also what do you log through the V24 and cli console ports of the V24 ?

Timmie
Member
Posts: 12
Joined: 12 Jan 2014 07:34

Re: configuring V24 cti interface module

Post by Timmie » 10 Apr 2016 16:17

also what do you log through the V24 and cli console ports of the V24 ?

alexeik
Member
Posts: 242
Joined: 26 Apr 2007 10:47
Location: Bad Oeynhausen, germany

Re: configuring V24 cti interface module

Post by alexeik » 11 Apr 2016 02:52

its a console to the linux system, maybe you can change the v24 Port to have some outputs, but i don´t think that these are usable for call logging.

doublezero
Member
Posts: 37
Joined: 12 Apr 2012 09:39

Re: configuring V24 cti interface module

Post by doublezero » 14 Apr 2016 16:14

Maybe an Option is to setup this connection AS Hotel interface Mike AHL protocoll. I am not sure which information will be send from oxe over AHL link

Gesendet von meinem A0001 mit Tapatalk
ACFE OXE R11.1 | ACSE OpenTouch R2.0 | ACSE 8770 R2.5

Post Reply

Return to “Specific Telephone Services”