Problem solved!
I had to set "PAI" instead of "yes" in the xivo trunk configuration "send remote party ID" and now this is what i receive on oXE:
"P-Asserted-Identity: "Delphine D" <sip:728@xxxx>"
and "Delphine D" is well displayed on caller phone.
Thanks
Display Name on trunk
Re: Display Name on trunk
HI RECHECK ur sip trace and i figure out that the file was some how cut , and on the cutten part i can see :
re is 0 P-Asserted-Identity header in the message.
re is 0 P-Asserted-Identity header in the message.
Re: Display Name on trunk
Hello Haroun,
Sorry i dont understand what you ask.
Problem is solved from oxe to xivo but now i have the problem from xivo to oxe... it doesn't display the trunk name but only the called number with no name, i check trace on xivo and oxe doesn't seem to send PAI to xivo when there is an incoming call.
"P-Asserted-ID in Calling Number" is set to true on the ext gateway to xivo on OXE.
ty
Sorry i dont understand what you ask.
Problem is solved from oxe to xivo but now i have the problem from xivo to oxe... it doesn't display the trunk name but only the called number with no name, i check trace on xivo and oxe doesn't seem to send PAI to xivo when there is an incoming call.
"P-Asserted-ID in Calling Number" is set to true on the ext gateway to xivo on OXE.
ty
Re: Display Name on trunk
Ok now its fixed on both ways.
"P-Asserted-ID in Calling Number" had to be to false for this last problem.
ty
"P-Asserted-ID in Calling Number" had to be to false for this last problem.
ty
