Trunk Access from remote Oxe

[muhammad hadi]

Deal All,
Please help me as I am facing one issue regarding SIP Trunking.I have a SIP trunk between oxo and oxe and dialing is perfect from one side to other.From oxo I have to press 9 to access 9 of the oxe which is the PRI trunk group at OXE end.I have managed theARS for 9 and I am now able to get the PRI of oxe but issue is that as soon as I press 9 from oxo I dont get any dial tone, I dialled the number from oxo after pressing 9 I can make the outgoing calls but i can not get any dial tone when the called party receives the call i can talk to him but till that point i cant hear any tone.
Please assist me in this issue.Hope I have made my question understandable.I request you to please assist


Waiting for response.


Thanks in anticipation


Regards

[Maulwurf]

check oxo internal numbering plans. Should be 9 9 ARS drop no

[muhammad hadi]

Hi Maulwurf,
Thanks alot for your reply.Issue has been resolved as i have changed the parameter in the gateway parameters that is I have checked the called identification tone in media tab which was uncheck by default...


Thanks for your reply


Regards