HI Guys
I need help once again with a SIP setup.
Release L2.300.25 on OXE.
Client bought a third party call center solution call Real Connect. Currently 5 agents on PC's.
They asked me for a SIP trunk to the system. I set up the external gateway and SIP trunk with a network number 6005 (Also a DDI number in the system)
to route the calls to the Real Connect
- Firstly I set up the Trunkgroup as SIP ABCF. When dialling the the DDI number it routes from PRI via OXE to their server and IVR takes the call from there. Works 100%
But then we tested the call when dialling the main number and switchboard receives it and tries to transfer call to 6005. Call goes through and you start hearing the IVR and then call cuts. This happens from any internal extension as well. Call cuts few seconds after the transfer. Even when dialling from extension to extension and then transferring. (I thought it might be trunk to trunk problem but obviously its not.)
- Then I deleted the setup and created the SIP trunk as ISDN all Countries. Dial the DDI number from external or internal and it goes to IVR. Works 100%. When I dial another DDI number in the company and transfer the call to 6005 it goes through and works 100% without cutting the call when transferred. BUT...when trying to dial that network number 6005 from the switchboard (4059 IP), it gives me an error "INACCESSIBLE EXTENSION" Not 1 of the IP attendants can dial that network number. It works from IP phones.
I have attached my config of sip trunk and External sip gateway and a Motortrace3. Call cuts with external call from extension 6390 to 6005 (Network number) (PABX Room) when transferred.
thanx
Martin