OXE, 2 Dhcp ranges and 2 vlans

[taahir10]

Hi guys.
I am currently at a client's. He is requesting two dhcp range from an OXE on two different VLANs.
VLAN 66(appliances and media gateways)
VLAN 80 (IP PHONES AND SIP PHONES)

OXE:
Main: 192.168.66.30
Standby: 192.168.66.31
Virtual:192.168.66.32

Mask:255.255.255.0
Gateway: 192.168.66.1

DHCP RANGE 1(VLAN 66)
192.168.66.100-200

DHCP range 2(vlan 80)
192.168.80.50-192.168.95.200
Mask: 255.255.240.0
Gateway: 192.168.80.1

As per the client there's intervlan routing between vlan 66 and 80.

There's currently 5 IP Phones(4018) on vlan 80 n it os working fine with static ip.

Hw can i relay dhcp from the oxe on vlan 67 to devices in vlan 80.
Both ranges hv been created already.

Switch used omniswitch 9700

[murraya]

hi, if you set an IP helper on the vlan 80 ip interface to the OXE then the DHCP requset will be forwarded to the OXE.