Hello,
I'm playing around with some series 8 IP phones through telnet, but I was not able to find a whole list of commands and their meaning apart from the cryptic help command output.
I was wondering what kind of things I can do once I gain telnet access. Are there any hidden commands?
I'm trying to protect our network for a future hacking challenge , so I would like to know all kind of naughty things that can be done. I already discovered the "key sim" feature, which is allowing me to dial from the telnet menu so far..
Thanks!
Telnet commands in series 8 phones
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Telnet commands in series 8 phones
Hack? Impossible. Those commands are only available when enabling them on OXE first and then for a period of time only.
Check documentation, commands are there. There are a TC for IPTouch troubleshooting.
Protect OXE is the most important part.
Check documentation, commands are there. There are a TC for IPTouch troubleshooting.
Protect OXE is the most important part.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Telnet commands in series 8 phones
I'm on R11 and in the documentation I can find the IP phones menu under System Documentation / IP-PCX Networks / IP-Phones and then the maintenance chapter is there. It only mentions the way of activating the telnet access, but I cannot get anything about the commands once the telnet session has been established.
Can you point me in the right direction for the documentation? I have tried but the commands seems not to be there.
Can you point me in the right direction for the documentation? I have tried but the commands seems not to be there.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Telnet commands in series 8 phones
Search on BPWS for TG0028-Ed06
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer