R10.0 & Series 8

[Popesku]

Hello, Guru.

Help to solve the problem, please.
I have OXE Crystal R10.0-j1.410-49-a-ru-c6s2.
My boss wanted to change the old 4010 phones to the new 8029.
The distributor says that you need to upgrade to R12.0. The cost of upgrading 20,000 usd is very expensive.
Tell me, can there be a patch for my version, which will work with the Series 8?
Thank you.

[vad]

8029 - you need OXE R10.1.1 (j2.603.29b) and upper
But may be just use 4039?

[Popesku]

Thank you, VAD
As far as I know, 4029 have been removed from production.

Can there be a cheap solution?

[Popesku]

...4029 and 4039 are not produced ...
To replace 10 phones you need to spend 20,000 usd? It's funny.

[vad]

Not produced or not possible to buy this sets?

[vad]

Because you have old type phones (4010) - your system old enough. When system was upgraded to R10 - I think was 1 year SPS contract (and was possibilities to upgrade your system during this year to the new releases).

[Popesku]

Thank you, VAD
Not produced and not possible to buy...

I understand the vendor's desire to earn. ))
But in our case, he would rather lose the client. We have no other task than replacing several phones.
For 20,000 usd can replace the PBX. )
For R10.1 patch written, but for R10.0 - not? Very strange.
VAD, then there is no cheap solution? I need an exact answer, I'm sorry. )

[alex]

Just change 4010 type to 4029, buy 8029 and connect them .
I have a customer with R10.0-j1.410-49 who is using 8039 as 4039 at his own risk - he has been told about that. No problem noticed so far.
Actually when you configure 80x9 set the choice is 40x9/80x9.

[Popesku]

Thank you, alex.
I'll wait for the answer about the patch ...

Dear Guru, tell me, please, what is the last patch in the release of R10.0?

[vad]

On the BPWS - the last patch j1.410.63b.
But in read.me from this patch nothing about 80x9 sets.