Cisco 7961 SEPLOS extn's

[murraya]

Hi, Just wanting to see if anyone has got cisco 7961 phones working as seplos. I have tried sip 8.0.2sr1s and 8.3.1s software on the cisco phone and can make/receive calls as well as most features but cant get the message wait to work.
Has anyone got message wait light/envolope working on these phones with an OXE?
The OXE is 9.1 i1.605.12

Thanks in advance.

[tot3nkopf]

Some time ago I configured a 7941 just for fun. Worked in both SEPLOS and device mode ok. Hold was ok. OXE was 9.0 (don't remember the exact release).
SIP 8.3.1 was used

[murraya]

Thanks for that tot, I've no issue to get the phone to work with most features it's just the message wait that causes the issue for me. Normally after a sip phone registers I see a subscribe with the features it allows but with the Cisco I just get the register and no subscribe. I can't find anywhere how to make the phone subscribe which seems to be the issue.

[tot3nkopf]

I didn't had any issue. Maybe a config problem in Cisco xml?

[murraya]

Thanks, I alreay assumed that as I had not done cisco xml before that that was going to be the issue. many hours on web but no luck with it still,

[tot3nkopf]

PM me your private address and I will send you my config files.

[jmurillo]

Hi there, I have the same problem. Is possible you share me your config files. Regards.

[alemperu]

Hi Murillo, I have currently associated Cisco 7821 69xx telephones to an oxe central version 12.2, it has been possible to register as a sip device and a sip extension, I have a problem telephone facilities do not work, such as call forwarding, transfer, conference, could you help me to solve these problems?
asullcahuaman@ebdperu.com

ALEM SULLCA
997601910