Cisco 7961 SEPLOS extn's

Post Reply
User avatar
murraya
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 900
Joined: 16 Oct 2007 02:35

Cisco 7961 SEPLOS extn's

Post by murraya » 25 Apr 2010 23:58

Hi, Just wanting to see if anyone has got cisco 7961 phones working as seplos. I have tried sip 8.0.2sr1s and 8.3.1s software on the cisco phone and can make/receive calls as well as most features but cant get the message wait to work.
Has anyone got message wait light/envolope working on these phones with an OXE?
The OXE is 9.1 i1.605.12

Thanks in advance.
Best Regards
Murray

ACSE 10.0 corporate
ACSE 6.x IPT data

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4001
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Post by tot3nkopf » 28 Apr 2010 10:09

Some time ago I configured a 7941 just for fun. Worked in both SEPLOS and device mode ok. Hold was ok. OXE was 9.0 (don't remember the exact release).
SIP 8.3.1 was used

User avatar
murraya
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 900
Joined: 16 Oct 2007 02:35

Post by murraya » 28 Apr 2010 15:33

Thanks for that tot, I've no issue to get the phone to work with most features it's just the message wait that causes the issue for me. Normally after a sip phone registers I see a subscribe with the features it allows but with the Cisco I just get the register and no subscribe. I can't find anywhere how to make the phone subscribe which seems to be the issue.
Best Regards
Murray

ACSE 10.0 corporate
ACSE 6.x IPT data

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4001
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Post by tot3nkopf » 04 May 2010 03:50

I didn't had any issue. Maybe a config problem in Cisco xml?

User avatar
murraya
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 900
Joined: 16 Oct 2007 02:35

Post by murraya » 04 May 2010 04:37

Thanks, I alreay assumed that as I had not done cisco xml before that that was going to be the issue. many hours on web but no luck with it still,
Best Regards
Murray

ACSE 10.0 corporate
ACSE 6.x IPT data

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4001
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Post by tot3nkopf » 04 May 2010 04:42

PM me your private address and I will send you my config files.

jmurillo
Member
Posts: 3
Joined: 16 Dec 2010 03:25

Re: Cisco 7961 SEPLOS extn's

Post by jmurillo » 09 Nov 2017 17:41

Hi there, I have the same problem. Is possible you share me your config files. Regards.

Post Reply

Return to “SIP Extension”