Hi,
I'm working with 4018 in SIP mode and i'd like to change the ptime oprion in G729 from 20 to 30 ms
Anyone knows how to made it?? Is it possible in txt config file or by telnet connection??
Regards
Iptouch 4018EE rtp configuration
Re: Iptouch 4018EE rtp configuration
According to SIP version 2.12.13:
group sip
parameter g729_ptime=
Enum values codec Min Max Step
G729 10 80 10
codec Default
G729 20
group sip
parameter g729_ptime=
Enum values codec Min Max Step
G729 10 80 10
codec Default
G729 20
Re: Iptouch 4018EE rtp configuration29_ptime
Hi, thanks ,
But I've inclue option g729_ptime=30 in my txt file config but it does nos work.
This Phone is not registered to an OXE PBX.
Best regards
But I've inclue option g729_ptime=30 in my txt file config but it does nos work.
This Phone is not registered to an OXE PBX.
Best regards
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Iptouch 4018EE rtp configuration
Post logs. The fact that doesn't register can be something else. The option you are modifying is for how much time lapse will be between rtp packets on G729. Don't break everything for a little problem
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Iptouch 4018EE rtp configuration
Hi,
Really i'd like to work with Iptpuch phones with 30 ms of inerval packetization to solve jitter and delays in the net.
I Know the phone supports 20, 30 and 40. But I don't know how configure it.
I'm using uploaded document to configure it, but there are no refences to codec parametrization.
Really i'd like to work with Iptpuch phones with 30 ms of inerval packetization to solve jitter and delays in the net.
I Know the phone supports 20, 30 and 40. But I don't know how configure it.
I'm using uploaded document to configure it, but there are no refences to codec parametrization.
You do not have the required permissions to view the files attached to this post.
Re: Iptouch 4018EE rtp configuration
Its old doc. Version 2.12.13 was introduced in year 2013. Take a look on TC1468ed07:
Edition 7 : 28 august 2013 Delivery for 2.12.13
2.1 Features delivered in 2.12.13
group sip
mptime_enable
0 =disable
1 =enable
Default value 0
and mentioned before ptime:
g711a_ptime=
g711u_ptime=
g723_ptime=
g729_ptime=
codec Min Max Step
G711a/u 5 80 5
G723 30 90 30
G729 10 80 10
Edition 7 : 28 august 2013 Delivery for 2.12.13
2.1 Features delivered in 2.12.13
group sip
mptime_enable
0 =disable
1 =enable
Default value 0
and mentioned before ptime:
g711a_ptime=
g711u_ptime=
g723_ptime=
g729_ptime=
codec Min Max Step
G711a/u 5 80 5
G723 30 90 30
G729 10 80 10
Re: Iptouch 4018EE rtp configuration
thanks for all Oxe_4400,
I'm testing it and i'd like to know how to force in the SDP negotiation to mark the annexb=no.
do you know how??
Best regards
I'm testing it and i'd like to know how to force in the SDP negotiation to mark the annexb=no.
do you know how??
Best regards
Re: Iptouch 4018EE rtp configuration
To set and insert in the "media attribute" field "annexb=no" in the SIP INVITE of OXO you have to uncheck the "Voice Active Detection" on VOIP PARAMETERS --> DSP.