Hunf I checked the Password it was Ok, I did the alterations that tgn sugested and still no luck untill I did some more reading and Alcatel Suggest that when we great a sip extension we must no fill in the SIP part .
Só I deleted and created the extension again the phone automatically connected .
Conclusion : With Tgn suggestion and recreating the extension without filling in the SIP part the phone connects perfectly .
Authentication is solved .
TG00069
The declaration of a SIP user binds the information configured in the SIP set with the information stored into the database of the OmniPCX Enterprise.
If you don‟t fill in the SIP part in the OmniPCX Enterprise user configuration, the default values will be : URL User Name = MCDU of the user. URL Domain = SIP domain name of the OmniPCX Enterprise, i.e. the SIP set is considered as registered on the OmniPCX Enterprise.
This is usually exactly what we want so you shouldn‟t modify anything here.
After the creation of the user a corresponding entry will automatically be added to the SIP Dictionnary.
Note: The value for the URL (<username>@<domainname>) configured on the SIP set and in the OmniPCX Enterprise SIP Dictionnary MUST match. This can be an issue if you modified one of these parameters by hand and not the other one.
I have now another problem , I able to call from the 8012 extension , but when I call from another extension to the 8012 the call does no go through .
I get an Invite then a get I 488 message error " not acceptable here "