can't config 4135 with oxo

[pankrawat]

hello all

I am trying to configure 4135 with oxo in static mode with vlan enable.
on phone its showing sip stack error.

on logs "switch registrar to ip of pbx"
"using not registered account"

Please help me on this

regards
pankaj

[enio.eltz]

Any trace? What is its configuration (IP@, SIP port)?

[pankrawat]

thanks for reply

i manage to resister 4135 with oxo but now when try to call any number an error occur that is "internal server error".
Any suggestion?

Regards
pankaj

[pankrawat]

sip trace

ep 2 13:58:07: RX 363 bytes Response msg 100/INVITE/cseq=16182 (rdata0x1df6ec) from UDP 192.168.0.11:5059:
SIP/2.0 100 trying -- your call is important to us
Via: SIP/2.0/UDP 192.168.0.18:5060;rport=5060;branch=z9hG4bKPjSTld4OZvyCxNpa5bTAPc0-.hWqSsKlxT
From: <sip:303@192.168.0.11>;tag=B82oCTITICscFkGGAcNWefxC8TznpS1v
To: <sip:0@192.168.0.11>
Call-ID: SC7pOoBScgxgWRB-DMSAMjk1HZFfQ9jM
CSeq: 16182 INVITE
Server: kamailio (3.2.2 (ppc/linux))
Content-Length: 0

---------------------------------------------------------------------------------
Sep 2 13:58:07: RX 331 bytes Response msg 100/INVITE/cseq=16182 (rdata0x1df6ec) from UDP 192.168.0.11:5059:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.0.18:5060;rport=5060;branch=z9hG4bKPjSTld4OZvyCxNpa5bTAPc0-.hWqSsKlxT
From: <sip:303@192.168.0.11>;tag=B82oCTITICscFkGGAcNWefxC8TznpS1v
To: <sip:0@192.168.0.11>
Call-ID: SC7pOoBScgxgWRB-DMSAMjk1HZFfQ9jM
CSeq: 16182 INVITE
Server: kamailio (3.2.2 (ppc/linux))
Content-Length: 0

---------------------------------------------------------------------------------
Sep 2 13:58:07: RX 450 bytes Response msg 500/INVITE/cseq=16182 (rdata0x1df6ec) from UDP 192.168.0.11:5059:
SIP/2.0 500 Internal Server Error
Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, PRACK, REFER, NOTIFY, UPDATE
User-Agent: OxO_SPG_910/040.001
To: <sip:0@192.168.0.11>;tag=bb6f87375b33489ef0269aea0a4f7f77
From: <sip:303@192.168.0.11>;tag=B82oCTITICscFkGGAcNWefxC8TznpS1v
Call-ID: SC7pOoBScgxgWRB-DMSAMjk1HZFfQ9jM
CSeq: 16182 INVITE
Via: SIP/2.0/UDP 192.168.0.18:5060;rport=5060;branch=z9hG4bKPjSTld4OZvyCxNpa5bTAPc0-.hWqSsKlxT
Content-Length: 0

---------------------------------------------------------------------------------
Sep 2 13:58:07: TX 416 bytes Request msg ACK/cseq=16182 (tdta0x2058a0) to UDP 192.168.0.11:5059:
ACK sip:0@192.168.0.11;transport=udp SIP/2.0
Via: SIP/2.0/UDP 192.168.0.18:5060;rport;branch=z9hG4bKPjSTld4OZvyCxNpa5bTAPc0-.hWqSsKlxT
Max-Forwards: 70
From: <sip:303@192.168.0.11>;tag=B82oCTITICscFkGGAcNWefxC8TznpS1v
To: <sip:0@192.168.0.11>;tag=bb6f87375b33489ef0269aea0a4f7f77
Call-ID: SC7pOoBScgxgWRB-DMSAMjk1HZFfQ9jM
CSeq: 16182 ACK
Route: <sip:192.168.0.11:5059;transport=udp;lr>
Content-Length: 0


---------------------------------------------------------------------------------

[enio.eltz]

Hi

You are using SIP port 5060. OXO doesn't listen to that port on extensions. You must configure port 5059.

Regards.

[pankrawat]

thanks
but how to configure it?
plz give some steps.

[enio.eltz]

I have never configured 4135 but usually when we need to set up the port we configure on the device the IP_OXO:5059

[pankrawat]

plz check image attached
that way i have to define

conference phone.jpg

[haroun]

also what's 0 ?
yes see oxo replied to you via 5059
ep 2 13:58:07: RX 363 bytes Response msg 100/INVITE/cseq=16182 (rdata0x1df6ec) from UDP 192.168.0.11:5059:
ep 2 13:58:07: RX 331 bytes Response msg 100/INVITE/cseq=16182 (rdata0x1df6ec) from UDP 192.168.0.11:5059:
Sep 2 13:58:07: RX 450 bytes Response msg 500/INVITE/cseq=16182 (rdata0x1df6ec) from UDP 192.168.0.11:5059:
signaling path should be at port 5059