GD3 Don't work automatically on PCS

Post Reply
jpissot
Member
Posts: 183
Joined: 22 Dec 2008 10:32

GD3 Don't work automatically on PCS

Post by jpissot » 21 Mar 2013 06:38

Hi,

On OXE R10 J1.410.40c.

There is a remote MG (with GD3) that is rescue by a PCS.

When the link between the MG and Main Call Server is lost, the GD3 don't reboot on the PCS, all the cards and phones are Out of service.
I reboot manually the GD3 (with the button) and the GD3 card is well connected to the PCS.

When the link betwenn the 2 sites is UP, the PCS reboot but the GD3 don't connect the main call server. I reboot manually the GD3 card (with the button) and the GD3 card connects to the main call server.

PCS Config

x Node Number (reserved) : 1 x
x Instance (reserved) : 1 x
x x
x Automatic update type + Daily x
x Reset type + Timeout x
x Database validity (in h) : 4 x
x Update time (hh:mm) : 03:00 x
x Reset timeout (in s) : 600 x
x

THank you for your help.

jpissot
Member
Posts: 183
Joined: 22 Dec 2008 10:32

Re: GD3 Don't work automatically on PCS

Post by jpissot » 26 Mar 2013 03:51

This problem is solved by replacing the GD3 card.

Post Reply

Return to “Passive Communication Server”