SNMP OID for T2 access supervision (OXE)

[oliver0513]

Hi all,

I would like to monitor how many channels were be used on T2 access and graph it with Cacti for example.
It's for Omnipcx enterprise, but i couldn't found anywhere the correspondant snmp OID to get it.

Any help ?

Thanks in advance.

[Elandryl]

Hi Oliver,

I'm sorry i don't have the solution but i'm looking for it too.
Did you find out which OID we need to look at ?

Thanks

[alex]

This feature is available from Release 9.0 of OXE. Check whether it is your case.

[Elandryl]

Exactly but i can't browse to find the OID myself.
I Can't add the A4400 mib to my snmp tools ....

Everytime there is an error

[alex]

[quote="ElandrylEverytime there is an error [/quote]
Did you configure SNMP parameters?
OID should start with 1.3.6.1.4.1.637

[Elandryl]

I open a case and it's not possible ......

This feature was in the roadmap but well ... what kind of people using snmp supervision would supervise trunks ?
So they didn't had it ....
But we can make a snmp request to get the OXE version !
I was enjoying that they add snmp to the OXE but it seems i was wrong ...

You have to send a marketing request throught your respective channel partner, maybe they will add it.

[alex]

This feature was in the roadmap but well ...
So they didn't had it ....

It is still there in the 9.0 course handouts.


But if you check MIBs - you would not find anything about TGs.

[jpissot]

Hello,

Have you find the oid for T2 access?
My customer would like supervise his T2?

Thanks

[Elandryl]

In R9 it didn't exist, as Alex said it's in courses book, i found it there too..
It was supposed to be added but it wasn't, i'm looking to R10 doc to see if they finally add it !

[letru1980]

SNMP 2c

trkAvailable (last octet is Trunk Group Number. i.e. TG 100 on this PBX)
1.3.6.1.4.1.637.64.4400.1.9.1.7.100 = "6" [ASN_INTEGER]

trkUse (last octet is Trunk Group Number. i.e. TG 100 on this PBX)
1.3.6.1.4.1.637.64.4400.1.9.1.8.100 = "0" [ASN_INTEGER]