The ultimate fault...

Post Reply
pluff
Member
Posts: 18
Joined: 02 Dec 2008 01:40

The ultimate fault...

Post by pluff » 05 Sep 2017 06:18

Just tried to install the new Amarda card onto a PowerCPU EE.
Can anyone please explain why AL would start using T8 screws instead of the T10 screws that have been used for the last 16 years? I don't have a T8 :(

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3387
Joined: 23 Sep 2004 06:47
Location: Russia

Re: The ultimate fault...

Post by vad » 05 Sep 2017 07:06

save the metal (two times - making a screw and a screwdriver), protect the nature :lol:

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6786
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: The ultimate fault...

Post by cavagnaro » 05 Sep 2017 09:01



Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

User avatar
murraya
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 900
Joined: 16 Oct 2007 02:35

Re: The ultimate fault...

Post by murraya » 06 Sep 2017 07:24

T8, T10 screwdriver???
I thought everyone just used side cutters like me :)
Best Regards
Murray

ACSE 10.0 corporate
ACSE 6.x IPT data

Post Reply

Return to “MAIN”