Hi all,
I have recently migrated a customer from OXE R 7.1 to R9.1 and hav upgraded omnivista from 4.2 to 5.1, i have synchronized omnivista without any problems, but when i try to use configuration i get a message CMISE reject, i have read some old posts here about the same subject matter and by using their tips n suggessions i have done dhs3_init -R CMISD but issue didnt resolve, i have not changed any passwords for ftp so this is not the problem with passwords, i have also kept cmise password disabled in omnivista, i have tried reinstalling omnivista on other machines too but issue still persists, can anyone help me out??
Omnivista CMISE error
Re: Omnivista CMISE error
May be you have wrong configuration for connection (in 4760). In old 4760 release - you need to declare only adfexc (ftp) password. In new as I remember - you need to declare mtcl (or/and?? swinst) password.
Re: Omnivista CMISE error
do you mean mtcl in CMISE password or somewhere else?
Re: Omnivista CMISE error
If there is duplication, try a double bascul...it worked for me!
- luis.molinas
- Member
- Posts: 109
- Joined: 08 Feb 2010 14:59
- Location: Asuncion-Paraguay
Re: Omnivista CMISE error
Hi Xero, can you solved this issue? I have the same problem.
Best Regards.
Best Regards.
Re: Omnivista CMISE error
I have CMISE issue when i was trying to use mgr command.
I have redundency, can i use bascul?
I have redundency, can i use bascul?
Re: Omnivista CMISE error
If you use mgr command on stand-by CPU - you have no CMISE error?
Re: Omnivista CMISE error
Sometimes - bascul can help.
Sometimes - after bascul you can have problem (Especially if the databases are not identical) .
Sometimes - after bascul you can have problem (Especially if the databases are not identical) .
- luis.molinas
- Member
- Posts: 109
- Joined: 08 Feb 2010 14:59
- Location: Asuncion-Paraguay
Re: Omnivista CMISE error
CMISE error is a software protection issue, we need to wait some timer(24 hours) until the next verification of the license between OXE and OV.