unable to call out by using gdesktop
-
cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: unable to call out by using gdesktop
It is an ALU product to ry to simplify the creation of agents but for large implementations can be a pain in the ass as reduces Genesys flexibility
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: unable to call out by using gdesktop
Ok. So I will control by manual is better.
b3studio
GCP7-CIV Genesys Certified Professional 7-Genesys Inbound Voice Platform
GCP7-CVP Genesys Certified Professional 7-Consultant Genesys Voice Platform
Genesys SIP Foundation & Deployment Version 8
GCP7-CIV Genesys Certified Professional 7-Genesys Inbound Voice Platform
GCP7-CVP Genesys Certified Professional 7-Consultant Genesys Voice Platform
Genesys SIP Foundation & Deployment Version 8
Re: unable to call out by using gdesktop
I have solution for this. I have Turn Off Auto sent DTMF from Trunk then can send dtmf successfully. (10.1.1 j2.60320.i)
b3studio
GCP7-CIV Genesys Certified Professional 7-Genesys Inbound Voice Platform
GCP7-CVP Genesys Certified Professional 7-Consultant Genesys Voice Platform
Genesys SIP Foundation & Deployment Version 8
GCP7-CIV Genesys Certified Professional 7-Genesys Inbound Voice Platform
GCP7-CVP Genesys Certified Professional 7-Consultant Genesys Voice Platform
Genesys SIP Foundation & Deployment Version 8
