Where to get software ?

Post Reply
Nanowish
Member
Posts: 3
Joined: 17 Dec 2008 19:14

Where to get software ?

Post by Nanowish » 17 Dec 2008 19:40

Hi,
I have IP/V24 WALLBOARD 2 x 16 digits 3BH11422AB : http://www.mws.vip.fr/french/produits/T ... 030032.pdf
and i need manager for set display message in wallboard. Where to get software for this?

iI'm french studdent and this is for my school's project.

Thank in advance

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7004
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Where to get software ?

Post by cavagnaro » 18 Dec 2008 00:40

Unfortnately we can't post such software as it is licensed and it is not free. You need to ask for it to your school as when they bought the PBX A4400 it should be included. The software is WallBoard Manager, but can only work for ACD (Call Centers).
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

Nanowish
Member
Posts: 3
Joined: 17 Dec 2008 19:14

Re: Where to get software ?

Post by Nanowish » 18 Dec 2008 02:49

oH :shock: i going to ask with my teacher :? ... or trying to decrypt/send tcp/ip frame from this wallboard.

Thank you for your answer... i'm very confused

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7004
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: Where to get software ?

Post by cavagnaro » 18 Dec 2008 10:31

Hehe I'm curious why they are teaching call center configuration in a school
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

Nanowish
Member
Posts: 3
Joined: 17 Dec 2008 19:14

Re: Where to get software ?

Post by Nanowish » 18 Dec 2008 11:03

My teacher for my project is old developper engineer, and teached how to send/receive packet frame from very special accessorie, and this old wallboard is from my Technologie Science teacher, I have choose this wallboard for learn how to read-write packet<->protocol from other source instead of computer. But I thought try with "official" software before start my project.

But i think this isn't best choose because:
- Is licenced stuff
- Is very closed accessibility
- Isn't too legal to decrypt any protocol from private stuff.

Thank you, and sorry for my bad english.

Mikado44
Member
Posts: 10
Joined: 23 Nov 2015 10:21

Re: Where to get software ?

Post by Mikado44 » 21 Feb 2018 09:27

Hello,


I know the message is old but I would like to know if you managed to run this wallborard from a pc and if so how did you do it?

:)

Post Reply

Return to “CCD / CCS / CCIVR”