Bell port in 4018
Bell port in 4018
Hello,
Does anyone knows the function of the RJ45 port with a picture of a bell at the bottom of the Alcatel 4018 phone? Its function is to connect a headset or an external loudspeaker?
Thanks
Does anyone knows the function of the RJ45 port with a picture of a bell at the bottom of the Alcatel 4018 phone? Its function is to connect a headset or an external loudspeaker?
Thanks
Re: Bell port in 4018
Hey,
Can someone tell me the part number of the external ringing module?
Thx!
Can someone tell me the part number of the external ringing module?
Thx!
Re: Bell port in 4018
Think this is the one: 3GV28050AA
Module relaying the ringing signal towards an external device for Alcatel-
Lucent IP Touch and Digital phones‚ compatible with Reflexes™ range‚ with
RJ11/RJ11 3m cable‚ without power supply
Henk
Module relaying the ringing signal towards an external device for Alcatel-
Lucent IP Touch and Digital phones‚ compatible with Reflexes™ range‚ with
RJ11/RJ11 3m cable‚ without power supply
Henk
Re: Bell port in 4018
Here's some info on the bell port. I think it's okay to post here as it is equipment for sale. I also will attach a circuit I made a few years ago that uses it. I guess Cav or Knigh will remove if need be.
cav:Yup, no attachs from Alcatel by the moment.
cav:Yup, no attachs from Alcatel by the moment.
Best Regards
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
Re: Bell port in 4018
I thought it may have been an issue Cav, But what about the circuit I designed a few years ago. this was by pulling a phone apart before doc's were at hand. I guess it's not copyrighted as I never applied for one
I will wait for the go ahead before I post as I don't want to upset anyone
I will wait for the go ahead before I post as I don't want to upset anyone
Best Regards
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Bell port in 4018
If you made the doc without extracting any pages or images from Alcatel documentation we are cool.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Bell port in 4018
Here it is. Please note that I have never got around to doing a final fix for the issue of false triggering if you touch the circuit board. This is not really an issue if you put the finished circuit into a box of some sort.
You do not have the required permissions to view the files attached to this post.
Best Regards
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Bell port in 4018
Nice
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer