Upgrade to 5.6.5

Post Reply
link
Member
Posts: 36
Joined: 19 Aug 2015 14:06
Location: Ukraine

Upgrade to 5.6.5

Post by link » 03 Feb 2018 12:49

Hello,
I'm trying to upgrade voicemail software A4635H (VPM35 board) from 5.4.9 to 5.6.5. For this I have connected to LAN switch and v24 console.
In startup process vpm board I tried to hit <DEL> to enter Bios setup but unsuccessfully, the system does not respond to input DEL key and continue to boot.
Is any other ways to upgrade A4635H system?
Thanks.

mgoegel
Member
Posts: 233
Joined: 12 Feb 2007 12:18
Location: Germany

Re: Upgrade to 5.6.5

Post by mgoegel » 04 Feb 2018 03:59

Maybe your terminal settings do not fit to the console.
Have you tried with backspace or CTRL H

Regards Mario


Gesendet von iPad mit Tapatalk

link
Member
Posts: 36
Joined: 19 Aug 2015 14:06
Location: Ukraine

Re: Upgrade to 5.6.5

Post by link » 04 Feb 2018 12:12

Ok, I'll try and give response.
Thanks.

alexeik
Member
Posts: 252
Joined: 26 Apr 2007 10:47
Location: Bad Oeynhausen, germany

Re: Upgrade to 5.6.5

Post by alexeik » 05 Feb 2018 05:51

i had the same Problem, and finally used the good old hyperterminal...

link
Member
Posts: 36
Joined: 19 Aug 2015 14:06
Location: Ukraine

Re: Upgrade to 5.6.5

Post by link » 05 Feb 2018 16:42

I have installed SecureCRT and upgraded voicemail to 5.6.5 version successfully.

Post Reply

Return to “Voicemail (46x5)”