I have an AVST connected to PBX1, using SIP.
Everything is working great.
Other PBXs are connected to the PBX1 using a Point to point T1 (ABC-F).
When other nodes call AVST, they can't send DTMF signaling.
Anyone has the issue ?
Drives me nuts.
Thanks
PB of DTMF in scenario: AVST <-SIP-> NODE1 <-ABC-F-> NODE2
- frank
- Alcatel Unleashed Certified Guru
- Posts: 3169
- Joined: 06 Jul 2004 00:18
- Location: New York
- Contact:
PB of DTMF in scenario: AVST <-SIP-> NODE1 <-ABC-F-> NODE2
Code Free Or Die
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: PB of DTMF in scenario: AVST <-SIP-> NODE1 <-ABC-F-> NODE2
Using SIP Trunking dude? If so under the SIP Trunk there is a DTMF End to end dialing, how is it?
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
- frank
- Alcatel Unleashed Certified Guru
- Posts: 3169
- Joined: 06 Jul 2004 00:18
- Location: New York
- Contact:
Re: PB of DTMF in scenario: AVST <-SIP-> NODE1 <-ABC-F-> NODE2
I m pretty sure it is setup correctly.
If node1 calls AVST, DTMF works OK
It's just when NODE 2 <-ABCF-> NODE 1 <-SIP-> AVST
In this case, no DTMF (we can hear the DTMF on node 2, but nothing goes though abcf/sip to avst)
If node1 calls AVST, DTMF works OK
It's just when NODE 2 <-ABCF-> NODE 1 <-SIP-> AVST
In this case, no DTMF (we can hear the DTMF on node 2, but nothing goes though abcf/sip to avst)
Code Free Or Die
- frank
- Alcatel Unleashed Certified Guru
- Posts: 3169
- Joined: 06 Jul 2004 00:18
- Location: New York
- Contact:
Re: PB of DTMF in scenario: AVST <-SIP-> NODE1 <-ABC-F-> NODE2
Both DTMF and the other option are set to yes.
I tried that a long time ago, set them to NO.
Same shit.
I tried that a long time ago, set them to NO.
Same shit.
Code Free Or Die
- torrentula
- Alcatel Unleashed Certified Guru
- Posts: 814
- Joined: 29 Jun 2007 14:05
Re: PB of DTMF in scenario: AVST <-SIP-> NODE1 <-ABC-F-> NODE2
The only thing I can think is to make sure you are using out of band G711.
Re: PB of DTMF in scenario: AVST <-SIP-> NODE1 <-ABC-F-> NODE2
I also have AVST ver7.91SP! with 8.0(G130211a) across a hybrid link and the same thing happens , no DTMF when going across a link, if i find something i will let you know
Re: PB of DTMF in scenario: AVST <-SIP-> NODE1 <-ABC-F-> NODE2
one of my other nodes is AVST integrated via analog ports (4620) and the same thing happens , so it is not a SIP issue possible a ABCF issue
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: PB of DTMF in scenario: AVST <-SIP-> NODE1 <-ABC-F-> NODE2
We solved the issue on Asterisk side changing the DTMF on Asterisk to Inband mode. So Frank is looking something similar on AVST.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
- frank
- Alcatel Unleashed Certified Guru
- Posts: 3169
- Joined: 06 Jul 2004 00:18
- Location: New York
- Contact:
Re: PB of DTMF in scenario: AVST <-SIP-> NODE1 <-ABC-F-> NODE2
Ha no, hold on, here is the issue:
Asterisk <--SIP--> Node1 <--ABCF/T1CCS--> Node2
On Asterisk, in sip.conf, DTMF mode:
rfc2833 -> We can send DTMF from Node1, but not from Node2
INBAND -> We can send DTMF from Node2, but not anymore from Node1
Asterisk <--SIP--> Node1 <--ABCF/T1CCS--> Node2
On Asterisk, in sip.conf, DTMF mode:
rfc2833 -> We can send DTMF from Node1, but not from Node2
INBAND -> We can send DTMF from Node2, but not anymore from Node1
Code Free Or Die
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: PB of DTMF in scenario: AVST <-SIP-> NODE1 <-ABC-F-> NODE2
hehe so we got excited too fast
Dude if you put "auto" on Asterisk?? So in that way if rfc2833 is not supported on the sdp signaling then inband mode is used...
Dude if you put "auto" on Asterisk?? So in that way if rfc2833 is not supported on the sdp signaling then inband mode is used...
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer