SIP Ports throuth a firewall

Post Reply
Sam2009
Member
Posts: 149
Joined: 14 Jan 2009 02:25

SIP Ports throuth a firewall

Post by Sam2009 » 02 Dec 2012 04:31

HI
I have My TeamWork system ,It works in my LAN Network and I want to use it over public network (internet), I have MS ISA 2006 as firewall for my internal network.
I configure NAT settings for https port 443 , and open this rang of SIP ports : 5060-5090 TCP & UDP (Bi-directionally)
So I can Open MTW Client and connect to MTW Server ,and i could make voice calls with internal MTW client .
But the video end point of outside client could not register !!!!!!! :( :( so i am not able to make video calls with this outside user, the internal users can register automatically and makes calls.

Are there other SIP ports must be opened in Firewall, or any settings

thanks

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4023
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: SIP Ports throuth a firewall

Post by tot3nkopf » 03 Dec 2012 04:02

Check RTP port range on both Teamwork side and client side.
This is not secure. You must use something to hide your topology (SBC recommended, ALG SIP aware firewall).

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7001
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: SIP Ports throuth a firewall

Post by cavagnaro » 03 Dec 2012 11:16

SIP? NAT? Only using SBC...
SIP and NAT are not friends by default as NAT change headers
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

Post Reply

Return to “My Teamwork (ex-eDial)”