The Voice over IP module can not be initialized.

Post Reply
User avatar
felinux
Member
Posts: 2
Joined: 25 Apr 2013 11:16

The Voice over IP module can not be initialized.

Post by felinux » 25 Apr 2013 13:24

Hi Guys
I intalled MyIC v 2.7.00.33.000 but when i select My Current Phone>>My Computer displays a message that says The Voice over IP module can not be initialized.
Note: In windows XP working very good, the problem is in Windows 7

Any ideas? my ICS is 6.7.0
You do not have the required permissions to view the files attached to this post.

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6946
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: The Voice over IP module can not be initialized.

Post by cavagnaro » 25 Apr 2013 19:01

Check logs, firewall, network, etc. Usually is a network connectivity issue.
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

User avatar
felinux
Member
Posts: 2
Joined: 25 Apr 2013 11:16

Re: The Voice over IP module can not be initialized.

Post by felinux » 30 Apr 2013 18:58

Hi cavagnaro,
I check the log, off the firewall, antivirus, run the MyICS with administrator privilegies , i check the network but the problema persist and i get new message
You do not have the required permissions to view the files attached to this post.

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6946
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: The Voice over IP module can not be initialized.

Post by cavagnaro » 02 May 2013 23:44

Have you configured GD/INTIP board on ICS nomadic parameters?
can you ping the GD/INTIP board configured there?
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

zmagyar
Member
Posts: 1
Joined: 16 Jul 2013 15:27

Re: The Voice over IP module can not be initialized.

Post by zmagyar » 18 Jul 2013 05:29

Hello, Felinux, did you fixed the issue, I have the same problem.
Thanks,

Post Reply

Return to “MyIC (My Instant Communicator)”