Multi-occupancy

Post Reply
cjavelle
Member
Posts: 3
Joined: 01 Mar 2016 06:17

Multi-occupancy

Post by cjavelle » 17 May 2019 08:33

Hello,

I want to use Guest Management for my Hotel application but when i active "Guest Management" on mgr / Application / Hotel / Management Mode
I receive this message :

Management mode: Forbidden : inconsistency multi-used function - station

And When I create a User with Use Type Of Dir. No. to Multi Occupation, i have this message (Hotel-Set Function si to Room and set type is analog) :

OBJECT -1: ATTRIBUTE 0: Forbidden : inconsistency multi-used function - station

I'm trying different mode for Multioccupation Type in mgr / Application / Hotel / Numerical Parameters / Multioccupation Type but the result is the same.

Coul'd you help me?

User avatar
oldboy
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 760
Joined: 25 Aug 2005 18:24

Re: Multi-occupancy

Post by oldboy » 20 May 2019 22:32

Do you have any rooms already programmed in the system? As you cannot change mid way through whole system needs to be Mulit Occ
"Be aware ask a stupid question without at least trying to find the answer first you may get a stupid answer....."

cjavelle
Member
Posts: 3
Joined: 01 Mar 2016 06:17

Re: Multi-occupancy

Post by cjavelle » 21 May 2019 03:38

Yes it was the problem.
I'm deleting room and after I can modify Management modeet create new room with multi-occupation

Thanks

Post Reply

Return to “Hotel / Hospital”