ICS 6.7 and OXE 12.1

Post Reply
bouqueth
Member
Posts: 1
Joined: 02 Jun 2008 09:09
Location: Baden-Baden, Germany

ICS 6.7 and OXE 12.1

Post by bouqueth » 09 Mar 2018 05:16

Is anyone outthere, who knows if ICS 6.7 and OXE 12.1 is functional together?
I will Upgrade my OXE in Q2-2018 to Release 12.1 and need all functions from our ICS 6.7 installation.
Thanks for every comment.
Harry

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6946
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: ICS 6.7 and OXE 12.1

Post by cavagnaro » 09 Mar 2018 07:03

I would say test it, by ALE it is not compatible.
Maybe some SIP changes could affect it but depends on what exactly you are using.


Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4009
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: ICS 6.7 and OXE 12.1

Post by tot3nkopf » 10 Mar 2018 13:55

Search for the compatibility doc. I remember I have seen it and according to it ICS 6.7 is no longer compatible with R12. Also in Actis you are forced to remove it... Of course if you use old types of phones you can still test (maybe no issues) as Cav suggested.

mgoegel
Member
Posts: 233
Joined: 12 Feb 2007 12:18
Location: Germany

Re: ICS 6.7 and OXE 12.1

Post by mgoegel » 11 Mar 2018 04:22

I would not expect, that it would work together.
There is a important change on the CSTA interface in R12.1, therefore the older OT (less than 2.2.1) will also not work.
Regards Mario


Gesendet von iPad mit Tapatalk

User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4009
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: ICS 6.7 and OXE 12.1

Post by tot3nkopf » 12 Mar 2018 04:04

mgoegel wrote:
11 Mar 2018 04:22
There is a important change on the CSTA interface in R12.1
Any details?

mgoegel
Member
Posts: 233
Joined: 12 Feb 2007 12:18
Location: Germany

Re: ICS 6.7 and OXE 12.1

Post by mgoegel » 12 Mar 2018 05:16

Authentication needed for the CSTA bypass.

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6946
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: ICS 6.7 and OXE 12.1

Post by cavagnaro » 12 Mar 2018 07:55

Ohhh that is quite a change
New TSAPI then?


Enviado de meu E6633 usando Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

mgoegel
Member
Posts: 233
Joined: 12 Feb 2007 12:18
Location: Germany

Re: ICS 6.7 and OXE 12.1

Post by mgoegel » 12 Mar 2018 11:09

cavagnaro wrote:
12 Mar 2018 07:55
Ohhh that is quite a change
New TSAPI then?
That's a good question. Have not looked for it.

Just mentioned it on a test and looked a little deeper. ;-)
I also found no docs on this change.

Regards Mario

Post Reply

Return to “OmniTouch 8400 Instant Communication Suite”