ICS 6.7 and OXE 12.1

bouqueth · Post by **bouqueth** » 09 Mar 2018 05:16

Is anyone outthere, who knows if ICS 6.7 and OXE 12.1 is functional together?
I will Upgrade my OXE in Q2-2018 to Release 12.1 and need all functions from our ICS 6.7 installation.
Thanks for every comment.
Harry

Post by **cavagnaro** » 09 Mar 2018 07:03

I would say test it, by ALE it is not compatible.
Maybe some SIP changes could affect it but depends on what exactly you are using.

Enviado de meu E6633 usando Tapatalk

Post by **tot3nkopf** » 10 Mar 2018 13:55

Search for the compatibility doc. I remember I have seen it and according to it ICS 6.7 is no longer compatible with R12. Also in Actis you are forced to remove it... Of course if you use old types of phones you can still test (maybe no issues) as Cav suggested.

mgoegel · Post by **mgoegel** » 11 Mar 2018 04:22

I would not expect, that it would work together.
There is a important change on the CSTA interface in R12.1, therefore the older OT (less than 2.2.1) will also not work.
Regards Mario

Gesendet von iPad mit Tapatalk

Post by **tot3nkopf** » 12 Mar 2018 04:04

mgoegel wrote: ↑11 Mar 2018 04:22 There is a important change on the CSTA interface in R12.1

Any details?

mgoegel · Post by **mgoegel** » 12 Mar 2018 05:16

Authentication needed for the CSTA bypass.

Post by **cavagnaro** » 12 Mar 2018 07:55

Ohhh that is quite a change
New TSAPI then?

Enviado de meu E6633 usando Tapatalk

mgoegel · Post by **mgoegel** » 12 Mar 2018 11:09

cavagnaro wrote: ↑12 Mar 2018 07:55 Ohhh that is quite a change
New TSAPI then?

That's a good question. Have not looked for it.

Just mentioned it on a test and looked a little deeper.

I also found no docs on this change.

Regards Mario

Alcatel Unleashed

ICS 6.7 and OXE 12.1

ICS 6.7 and OXE 12.1

Re: ICS 6.7 and OXE 12.1

Re: ICS 6.7 and OXE 12.1

Re: ICS 6.7 and OXE 12.1

Re: ICS 6.7 and OXE 12.1

Re: ICS 6.7 and OXE 12.1

Re: ICS 6.7 and OXE 12.1

Re: ICS 6.7 and OXE 12.1