Couldn't configure voicemails on 8440

[bibou]

Hi all,

I've configure this week a voicemail 8440 with a Red Hat 5 Update 4 64 bits.
I've installed the last version 6.1.000.103c and I used the Boot CD for OS 64bits.

All the configuration steps went fine : I used the deployment file sent with the Actis, replaced the alcotuc.lic file (the MAC address specified is the good one).
Then I installed the TTS motor and desired languages, configured the Call Server via the web interface, the media server etc......
The SIP registration on the Call Server is done, and I call the voicemail, and begin the configuration for my voicemail.... I register my name, define a new password but at the end of the configuration, I've got the following message :
"You haven't granted access to this application. Please contact your administrator".

After some research, I found that the directory /var/vms/ngvm2 which stores all the voicemails, is not created on my 8440 server.
I think that this is a root cause of the problem that I explained below.

Does someone already get this kind of problem, or has any clue to fix it ?

For information, I've already installed 2 others 8440 voicemail on my network (but working under a Red Hat 32 bits system), and I've never get this kind of message.

I'll be greatful for your help.

Thanks.

[bibou]

I've solved the problem:

I had to put access right "chmod vmuser:vmgroup" to directories /var/vms and to directory /var/vms/ngvm2.

[skipper-com]

Bibou, thank you very much for so great research! I've change the rights and voice mail works now.

[nadeeem]

Can you please tell in detail the procedure to grant access?

[nadeeem]

ok i manged to configure it and now its working fine. thanks

[komar_666]

the good command to affect right is:

chown vmuser:vmgroup "to directories /var/vms and to directory /var/vms/ngvm2"

[gogo22]

while configuring the call server , and when trying to add network identifier , i got Error message "this node identifier is not unique"

attached: snapshot from the error message.


how can i overcome this issue ?

note: i tried to set more than one value (0,1,2,..........) But got same message.

waiting your appreciate response.

[cavagnaro]

Change the node ID on pbx

Enviado de meu C6603 usando Tapatalk