More than one IP address ERROR while running checkSystemLinux.sh file of OT8440

Post Reply
vijayam133
Member
Posts: 9
Joined: 20 Apr 2015 07:25

More than one IP address ERROR while running checkSystemLinux.sh file of OT8440

Post by vijayam133 » 12 Jun 2015 10:28

Hi everybody,

I am trying to install OT 8440 VM in IBM3250 sever(having 2 LAN ports). RED HAT Linux 5 has been successfully installed & i provided all the ip @ to the server. After that i am running checkSystemLinux.sh file from the DVD-ROM, at the end i am receiving the following error.

Some problem found on this system:
More than one IP address


Current status of the system is NOT READY.


Pls help me to solve this.
You do not have the required permissions to view the files attached to this post.

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7004
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: More than one IP address ERROR while running checkSystemLinux.sh file of OT8440

Post by cavagnaro » 12 Jun 2015 14:52

Fix? YEs, you can only have 1 IP Address, both will have same IP via a BOND interface. So if eth0 goes down then eth1 will come up with same IP. Obvisouly both need to be connected to different switches.
This is for redundancy.

If you just don't care, fix and leave ETH0 plugged in.
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7004
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: More than one IP address ERROR while running checkSystemLinux.sh file of OT8440

Post by cavagnaro » 12 Jun 2015 14:52

All is on documentation and on training...
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

vijayam133
Member
Posts: 9
Joined: 20 Apr 2015 07:25

Re: More than one IP address ERROR while running checkSystemLinux.sh file of OT8440

Post by vijayam133 » 13 Jun 2015 01:43

Yes i am allowing it for BONDING.
But i cant understand the reason, Failure of MORE THAN ONE IP ADDRESS.
Because of this i cant complete the Software installation

User avatar
tgn
Member
Posts: 801
Joined: 30 Dec 2009 17:59
Location: Germany

Re: More than one IP address ERROR while running checkSystemLinux.sh file of OT8440

Post by tgn » 13 Jun 2015 02:51

please post output from ifconfig command and attach the file dmesg. txt (create it with dmesg > dmesg. txt).

regards...
--- back to basics... focus your eyes to the essential things... ---

vijayam133
Member
Posts: 9
Joined: 20 Apr 2015 07:25

Re: More than one IP address ERROR while running checkSystemLinux.sh file of OT8440

Post by vijayam133 » 13 Jun 2015 08:04

thanks for all ur support...

Problem with the usb0 Ethernet interface in the server(DHCP enabled),
but ip address is showing in the command ifconfig | grep inet
so disabled the usb0 Ethernet interface & run the .sh file.
Now i am not getting the MORE THAN ONE IP ADDRESS Error & application also installed.

Post Reply

Return to “OmniTouch 8440 Messaging Software”