Hey Guys
I have a CPU6 with R7.1 installed and I can´t connect to the voice server through IP .
Thorugh V24 I get this message
eth0: Transmit timed out, status 0x000000, resetting...
eth0: Transmit timed out, status 0x000000, resetting...
eth0: Transmit timed out, status 0x000000, resetting...
eth0: Transmit timed out, status 0x000000, resetting...
eth0: Transmit timed out, status 0x000000, resetting...
eth0: Transmit timed out, status 0x000000, resetting...
eth0: Transmit timed out, status 0x000000, resetting...
eth0: Transmit timed out, status 0x000000, resetting...
Link encap:Ethernet HWaddr 00:80:9F:60:2A:DF
inet addr:172.33.23.5 Bcast:172.33.23.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3625317 errors:0 dropped:0 overruns:0 frame:0
TX packets:175610 errors:46829 dropped:127846 overruns:0 carrier:31332
collisions:0 txqueuelen:100
Interrupt:5 Base address:0xb000
I tried a new switch same thing , tried new cables same thing , swapped the port from E0 to E1 same thing and tried to connect directly to my PC.
Can some one help me here , i don´t know what else to do .
Thanks in advance
CPU6 ETH0 problem eth0: Transmit timed out
Re: CPU6 ETH0 problem eth0: Transmit timed out
Nobody Really ?
Re: CPU6 ETH0 problem eth0: Transmit timed out
If you have duplicated CPU (you talk about E0 and E1):
- both CPU connected to switch?
- embedded ethernet disabled?
- you have problem with one CPU or with both?
- both CPU connected to switch?
- embedded ethernet disabled?
- you have problem with one CPU or with both?
Re: CPU6 ETH0 problem eth0: Transmit timed out
Hey VAD, no there is no duplicated CPU , I have only one CPU onsite , we switched CPU´s and using the same HDD , and for now it is working fine .
I think It´s a problem on the Board .
I think It´s a problem on the Board .