HSL 1 and 2

L_lefante
Member
Posts: 174
Joined: 07 Aug 2013 10:30

Re: RE: Re: HSL 1 and 2

Post by L_lefante » 16 May 2016 08:30

vad wrote: But if you have one expansion cabinet and HSL2? F.e. during initial ordering - was supplyed HSL2 (for future expansion).
Is for this reason that I ask. We are installing a new expansion shelf and I want to make sure if gd has hsl2 and it should work or if it has hsl1 and need to be replaced.

As you can see, from this depends turning off the gd or not.

There should be some place where to look this.

Regards,

Enviado desde mi LG-D722 mediante Tapatalk

User avatar
tgn
Member
Posts: 790
Joined: 30 Dec 2009 17:59
Location: Germany

Re: HSL 1 and 2

Post by tgn » 16 May 2016 13:48

maybe there is an information in the logs (in /var/log) on the gd?

regards...


--- back to basics... focus your eyes on the essential things... ---
--- back to basics... focus your eyes to the essential things... ---

User avatar
murraya
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 900
Joined: 16 Oct 2007 02:35

Re: HSL 1 and 2

Post by murraya » 17 May 2016 05:16

good point however if Actis was used to configure the original install it would only have opted for hsl1.
maybe you have the actis files for the system, if so then on the last tab (cabinets) hover over the GD and it will show what was ordered.
of course this is not a garentee as the installer may have swapped it out but you have to trust something I guess.
Best Regards
Murray

ACSE 10.0 corporate
ACSE 6.x IPT data

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 6943
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: HSL 1 and 2

Post by cavagnaro » 17 May 2016 13:03

Call customer and "hey can you send me a pic?" XD saved hours of travel

Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

Post Reply

Return to “Boards”