INTOF2 Trouble

[Split]

Hi all

i have trouble with INTOF2 Cards and want know if there are some maintenance commands for this board?

Oxe Release 11.0 -30-f running

I get many incidents like this:

30/01/14 18:17:54 001001M|000/05/-/---|=2:3720=C1 Access Pb INTIP3[INTOF/INT2B]Hexa C1Flag:f1,fe[Time],HostFlg:0,0,HstST:0,LINE:0,0,
30/01/14 18:18:18 001001M|000/19/-/---|=2:3720=C1 Access Pb INTIP3[INTOF/INT2B]Hexa C1Flag:f1,fe[Time],HostFlg:0,0,HstST:0,LINE:0,0,

incinfo GEA 3720 not really help ......... im a litte bit confused

with Release 11.0-25f i dont get this incidents but we have install the -30f patch because external Handover was not working.

Did somebody know how i can check if the INTOF2 Cards have the right binarys flashed .........i get incidents with binary download if i put the INTOF2 Cards in ....but may be i can check it like INTIP´s => readhead INTIP

Somebody a idea?

Thanks a lot

[Split]

Update: with cpl_online 0 5 connect to INTOF2 Card => ?? you can see the binary which is flashed in this case ist 3.1 this are the right binary => so my problem still consist

[Eliott]

It is a SW problem in r11.0
You have to wait for R&D.
As soon as fixed I let you know the solution.

[azamated]

Have the same issue
please let me know as well

[tgn]

Having a similar issue here in 2 telephone systems:

-R11.0 Patch 30f
-R10.1.1 Patch 27

in R11 the failur is like this:

26/02/14 07:44:24 000000M|000/13/-/---|=2:3720=C1 Access Pb INTIP3[INTOF/INT2B]Hexa C1Flag:f1,fe[Time],HostFlg:0,0,HstST:1,LINE:0,0,

in R10.1.1 Patch 27 the incident is a little bit different:

09/04/14 10:18:32 000001M|000/08/-/---|=2:3720=C1 Access Pb INTIP3[INTOF/INT2B]Hexa C1Flag:f1,fe[Time],HostFlg:d,0,HstST:a,LINE:2,84

both systems have
duplicated cpu7step2 with io2n
a double intof connection to the remote shelf.
a voicemail system (vpu5/vpm35)
intip boards in the remote shelf.

regards...

[Eliott]

Problem is solved with firmware bnvintof (NVTOF2) 3.2 09Apr14_12h22
(Officially solved from R11.0 k1.400.33.a)

bnvintof.zip

[Split]

Thanks for the information eliott did somebody know the impact for the system .....last week we did a upgrade to r11.0.1 and the binary still 3.1 ...if there no impact i wait for a official patch ...

[Eliott]

No impact. You can use the same binary in R10.1.1

[stancu_adi]

Hello,

There is any impact for the users?
I'm opening an eSR but want to know if till i will have an answer to try to update or not the binary provided by Elliot.

Thanks,
Adrian