PRA-T2 can't come Inservice ( INIT 2 RUN)
-
- Member
- Posts: 246
- Joined: 09 Apr 2009 21:38
- Contact:
PRA-T2 can't come Inservice ( INIT 2 RUN)
Hi all,
my oxe running on R11. i faced problem with PRA-T2 board, it could not come inservice whenerver i reset card or reboot system. it's hang on INIT 2 RUN .
+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 2 | 0 | GD3|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 5 | SLI2 8 (Z)|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 6 | PRA T2|---------- | INIT 2 RUN | BAD PCMS CODE |
| 2 | 7 | APA 4|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 8 | CS2|---------- | CALL SERVER | BAD PCMS CODE |
+-------------------------------------------------------------------+
i must remove APA, SLI cards and PRA-T2 card also, then deleted and created again PRA card , insert PRA card back to system. it come inservice.
the problem come again whenever the system reboot or PRA card reset.
any pro can help me, pls !
my oxe running on R11. i faced problem with PRA-T2 board, it could not come inservice whenerver i reset card or reboot system. it's hang on INIT 2 RUN .
+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 2 | 0 | GD3|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 5 | SLI2 8 (Z)|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 6 | PRA T2|---------- | INIT 2 RUN | BAD PCMS CODE |
| 2 | 7 | APA 4|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 8 | CS2|---------- | CALL SERVER | BAD PCMS CODE |
+-------------------------------------------------------------------+
i must remove APA, SLI cards and PRA-T2 card also, then deleted and created again PRA card , insert PRA card back to system. it come inservice.
the problem come again whenever the system reboot or PRA card reset.
any pro can help me, pls !
-
- Member
- Posts: 246
- Joined: 09 Apr 2009 21:38
- Contact:
Re: PRA-T2 can't come Inservice ( INIT 2 RUN)
any one can help me ?
i upgraded system to R11.1-l1.301-31-a-vn-c82 . the problem still there.
if the T2 access was created before the card was inservice, the hang will be hang on INIT 2 RUN.
i had to delete the T2 access on trunk group and reset card by rstcpl comand, then it came back to inservice.
Then I created T2 access and assiged to trunk group.
i upgraded system to R11.1-l1.301-31-a-vn-c82 . the problem still there.
if the T2 access was created before the card was inservice, the hang will be hang on INIT 2 RUN.
i had to delete the T2 access on trunk group and reset card by rstcpl comand, then it came back to inservice.
Then I created T2 access and assiged to trunk group.
- tot3nkopf
- Alcatel Unleashed Certified Guru
- Posts: 4058
- Joined: 02 Feb 2006 10:41
- Location: Germany & Romania
- Contact:
Re: PRA-T2 can't come Inservice ( INIT 2 RUN)
Did you replaced the board with another one to see if the behaviour is just the same?
-
- Member
- Posts: 246
- Joined: 09 Apr 2009 21:38
- Contact:
Re: PRA-T2 can't come Inservice ( INIT 2 RUN)
yes. i tried with new one. and faced same behaviour
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: PRA-T2 can't come Inservice ( INIT 2 RUN)
Which kind of CPU you have and how many boards?
Enviado de meu C6603 usando Tapatalk
Enviado de meu C6603 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 246
- Joined: 09 Apr 2009 21:38
- Contact:
Re: PRA-T2 can't come Inservice ( INIT 2 RUN)
i using CS-2 board, and only one now.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: PRA-T2 can't come Inservice ( INIT 2 RUN)
And how many boards on your whole system depending of this CS2? 3 full shelfs?
I ask because could be a processing issue where your CPU can't handle the whole requests and just won't start your board.
Have you tried a different position for it?
Enviado de meu C6603 usando Tapatalk
I ask because could be a processing issue where your CPU can't handle the whole requests and just won't start your board.
Have you tried a different position for it?
Enviado de meu C6603 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 246
- Joined: 09 Apr 2009 21:38
- Contact:
Re: PRA-T2 can't come Inservice ( INIT 2 RUN)
Hi pro,
the shelf here:
+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 2 | 0 | GD3|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 5 | SLI2 8 (Z)|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 6 | PRA T2|---------- | INIT 2 RUN | BAD PCMS CODE |
| 2 | 7 | APA 4|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 8 | CS2|---------- | CALL SERVER | BAD PCMS CODE |
+-------------------------------------------------------------------+
it NOT FULL.
i tried with other slot and other new PRA-T2 board. But got same behaviour.
i just want to confirm that
if the T2 access was created before the card was inservice, the hang will be hang on INIT 2 RUN.
i had to delete the T2 access on trunk group and reset card by rstcpl comand, then it came back to inservice.
Then I created T2 access and assiged to trunk group.
the shelf here:
+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 2 | 0 | GD3|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 5 | SLI2 8 (Z)|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 6 | PRA T2|---------- | INIT 2 RUN | BAD PCMS CODE |
| 2 | 7 | APA 4|---------- | IN SERVICE | BAD PCMS CODE |
| 2 | 8 | CS2|---------- | CALL SERVER | BAD PCMS CODE |
+-------------------------------------------------------------------+
it NOT FULL.
i tried with other slot and other new PRA-T2 board. But got same behaviour.
i just want to confirm that
if the T2 access was created before the card was inservice, the hang will be hang on INIT 2 RUN.
i had to delete the T2 access on trunk group and reset card by rstcpl comand, then it came back to inservice.
Then I created T2 access and assiged to trunk group.
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: PRA-T2 can't come Inservice ( INIT 2 RUN)
Weird, seems that processing is not the problem.
Usually I insert the board and system will initialize it.
If no TG using it then will get free but already running. Then you can add to a TG or create a new one for it.
If a TG is configured (scenario where you replace a board) then it should work without any issue...
Which version are you running?
Enviado de meu C6603 usando Tapatalk
Usually I insert the board and system will initialize it.
If no TG using it then will get free but already running. Then you can add to a TG or create a new one for it.
If a TG is configured (scenario where you replace a board) then it should work without any issue...
Which version are you running?
Enviado de meu C6603 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 246
- Joined: 09 Apr 2009 21:38
- Contact:
Re: PRA-T2 can't come Inservice ( INIT 2 RUN)
R11.1-l1.301-31-a-vn-c82