I have issue with my qsig trunk where in oxe PRA I getting LOS signal
Also getting incidents
T2 Access 75 end timed out
Also I’m sure the cable between oxe and Avaya is good I tested
What could be the issue for this trunk down ?
Sent from my iPhone using Tapatalk
OXE Avaya PRA trunk down
-
- Member
- Posts: 133
- Joined: 13 Nov 2017 01:42
Re: OXE Avaya PRA trunk down
After reset the PRA from Avaya The issue will occur again what I have to do for the issue not to be returned
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: OXE Avaya PRA trunk down
Check clocks, define one as master, guess Avaya should be it. Then your Trunk will sync against it
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 133
- Joined: 13 Nov 2017 01:42
Re: OXE Avaya PRA trunk down
Hi Cavagnaro thanks for your reply how can I check clock from OXE you are saying about synchronization priority
If that how much value need to set ?
Sent from my iPhone using Tapatalk
If that how much value need to set ?
Sent from my iPhone using Tapatalk